This is a reverse osmosis membrane treatment chemicals . It is highly concentrated polymer chemicals.
RXSOL Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highly effective in preventing membrane scaling. Applied Membranes carries a large inventory of RXSOL Antiscalant at competitive prices with technical support. Our design engineers can help you determine the proper dosing for our application. Most products in stock for immediate shipment.
Without some means of upstream scale inhibition, RO membranes and their flow passages will foul due to scale, the precipitation of sparingly soluble salts. Common examples of scale are calcium carbonate (CaCO3), calcium sulfate (CASO4), barium sulfate (BaSO4), and strontium sulfate (SrSO4). Less common but equally problematic are silica (SiO2) and calcium fluoride (CaF) scales.
Dissolved iron salts are stabilized through the sequestration mechanism, in addition, suspended sediments containing iron in the form of Fe (OH) 3, FePO4, FeCO3 will stabilize through the dispersion mechanism. A reagent having such a double action remains effective over a wide pH range (6
RXSOL Antiscalant is an aqueous solution of an organic chemicals. RXSOL Antiscalant is miscible with water in all proportions. It may be applied as the neat product, or as a solution in permeate. RXSOL Antiscalant should be dosed continuously and proportionately to the feed water flow, to maintain the recommended dose level.
The dose level required is dependent on the quality of the saturation indices of the various scales forming species present in the concentrated brine. Proprietary computer software is used to calculate scaling indices and calculate optimum system recovery. Dose level projections and recommendations are available on
request.
Dosage
To prevent precipitation of metal oxides, it is necessary to maintain a constant concentration of RXSOL in the processed system from 2 to 50 mg / dm3. The optimum dose of reagent depends on the amount of sediment in the system and the controlled parameters. When RXSOL-33-3302-020 is used as the sole treatment facility, the reagent dose should be higher than when used together with other reagents.
:::::::::::::::::::::::::::::::::::::::::::::
RO antiscant
Scaling is caused in membranes because the level of hardness salts in the water becomes highly concentrated as it passes through the RO unit. In smaller units scale formation can be prevented by base exchange softening the make-up water but for larger systems that is very expensive. We have developed a range of easy to handle, cost effective RO Antiscalant which increase the solubility of the hardness salts so they remain in solution rather than forming scale on the membrane. Our cost effective RO antiscalants will inhibit a wide range of foulants including: calcium carbonate, calcium sulphate, barium sulphate, strontium sulphate, calcium fluoride, silica and iron.
RO Antiscalants are dosed directly to the RO feed water tank or feed water line (after pretreatment) at the recommended dosage of 1-3 mg/L and maximum dosage at 8mg/L, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content. Maximum dilution should be 10% with RO or DI water for temperature less than 30 deg C. For higher temperature the dilution ratio can increase.
Key Features and Benefits
- Inhibit scale formation and effectively controls corrosion
- Protects the membrane efficiently
- Enhance the plant operation and equipments life span
- Economical
- Easy in usage and handling
It reduces the risk of scaling and eliminates the use of hazardous acids,resulting in efficient plant operation with highest possible conversion rate.
It is a very effective antiscalant . It is also compatible with RO CHEMICALS series of coagulant and flocculants (polyelectrolytes). Our RO Antiscalant (HIGH PH) is effective in minimizing scaling in presence of foulants like Calcium Carbonate, Sulfate salts of Calcium, Barium, Strontium and Magnesium, Calcium Fluoride, Iron and Silica.
Key Features and Benefits
- Effective scale inhibition
- Alkalinity builder
- High recovery rate
- Low Chemical dosage
- Cost Effective
- Effective Iron fouling control by sequestration
- Reduced frequency of membrane cleaning
- Compatible with all types of membranes
- Completely organic and biodegradable
Application and Dosage
Our RO Antiscalant (HIGH PH) is dosed directly to the RO feed water tank or feed water line (after pretreatment) at the minimum recommended dosage of 1ppm and maximum dosage at 15ppm, subject to inlet water quality and parameters is respect of Calcium Hardness, Iron, TDS, Alkalinity, pH and silica content.
In case of high iron content of about 0.5 to 1.0ppm, the dosing has to be increased by 10-15ppm for stabilizing Calcium.
At about 10-15ppm dosage our RO Antiscalant (HIGH PH) is capable of fully inhibiting iron and calcium, and silica up to 166ppm. For higher silica content RXSOL ANTISCALANT should be used.
Antiscalant RO RXSOL-33-3302-025
Antiscalant C.I ALKA RXSOL-33-2034-025
Membrane Antiscalant ALKA 191T RXSOL-33-3321-030
Antiscalant ORG EV 2030 RXSOL-33-3325-230
Antiscalant RXSOL ORG EV RXSOL-33-3327
PHYSICAL PROPERTIES:-
Because RXSOL-33-3302-020 is a highly concentrated product,
It is acceptable to use small doses of reagent.
Suspended substances such as dirt, bottom sediments, clay, metal oxides are dispersed, and their possible precipitation decelerates. The strong dispersing power of RXSOL-33-3302-020 allows the reagent to maintain its efficiency in waters with high total salt content, as well as in areas with a low liquid flow rate. Salts of calcium and magnesium, such as CaCO3, CaSO4, CaSO4 · H2O, MgSiO4, are dispersed, and the formation of their sediments is suppressed.
Appearance: cloudy, viscous liquid
Density (kg / m3): 1180
pH (approximately): 9.8
Solubility in water: soluble in any proportion
Flash point: not determined
These data can be considered as typical values, but by no means as specifications
CHARACTERISTICS, ADVANTAGES & APPLICATIONS:-
- Excellent control of carbonate and sulphate scales for cost effective operation.
- Compatible with all major membranes
- International potable water approvals.
- Dispersant
- Iron tolerant
- Not affected by chlorine or other oxidizing biocides under normal conditions of use
RXSOL Antiscalant water additives, used as pretreatment for Reverse Osmosis systems, are highly effective in preventing membrane scaling. Applied Membranes carries a large inventory of Rxsol Antiscalant at competitive prices with technical support. Our design engineers can help you determine the proper dosing for our application. Most products in stock for immediate shipment.
Precautionary measures : Use protective gloves and goggles. If the reagent enters the skin, eyes, rinse with plenty of water, consult a doctor. If a reagent leakage is collected with sand or other absorbent material, rinse the contaminated surface with water. Before use, read the additional information in the Safety Instructions.
| Product Code | RXSOL-33-3302-025 |
| Product Name | ANTISCALANT |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kolkata, Kandla, Chennai, Visakhapatnam, Fujairah, Muscat Oman, CANADA
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| INGREDIENTS | CAS no |
Concentration |
Exposure Limits / Health Hazards |
EINECS |
|
Phosphonic acid, (1-hydroxyethylidene)bis-, Disodium salt NITRILOTRIS(Methylene)PHOSPHONATE Sodium SALT
Sodium Amino-Tris(Methylenshulphonate)
AMINOTRIMETHYLENEPHOSPHONIC ACID SODIUM SALT - ATMP-4NA
NITRILOTRIS(Methylene)PHOSPHONATE Sodium SALT
Sodium Amino-Tris(Methylenshulphonate)
AMINOTRIMETHYLENEPHOSPHONIC ACID SODIUM SALT - ATMP-4NA
|
20596-85-2 7414-83-7 |
10% | ND | 243-900-0 |
| SkinContact |
May be irritating |
| EyeContact |
May be irritating |
|
Inhaled |
Breathing of the mists, vapors or fumes may irritate the nose, throat and lungs. Symptoms may include sore throat, coughing, labored breathing, sneezing and burning sensation, depending on the concentration and duration of exposure. Overexposure to this material may cause systemic damage including target organ effects listed under "Toxicological Information |
|
Inhaled |
Remove to fresh air. If not breathing, institute rescue breathing. If breathing is difficult, ensure airway is clear and give oxygen |
|
skin contact |
Breathing of the mists, vapors or fumes may irritate the nose, throat and lungs. Symptoms may include sore throat, coughing, labored breathing, sneezing and burning sensation, depending on the concentration and duration of exposure. Overexposure to this material may cause systemic damage including target organ effects listed under "Toxicological Information |
|
eye contact |
Flush immediately with large amounts of water for at least 15 minutes. Eyelids should be held away from the eyeball to ensure thorough rinsing. GET IMMEDIATE MEDICAL ATTENTION |
|
Ingestion |
Keep affected person warm and at rest. GET IMMEDIATE MEDICAL ATTENTION. Never give anything by mouth to an unconscious person. Do not induce vomiting because of danger of aspirating liquid into lungs, causing serious damage and chemical pneumonitis |
|
EXTINGUISHING MEDIA |
Material itself will not burn |
|
BASIC FIRE FIGHTING PROCEDURES |
Area and fight fire from a safe distance. Use extinguishing agent suitable for type of surrounding fire. Use water spray to cool adjacent structures and to protect personnel. Shut off source of flow if possible. Firefighters must wear MSHA/NIOSH approved positive pressure breathing apparatus (SCBA) with full face mask and full protective equipment |
|
emergency action |
Keep unnecessary people away. Isolate spill area and keep unnecessary people away |
|
environmental precautions |
If product is released to the environment, take immediate steps to stop and contain release. Caution should be exercised regarding personnel safety and exposure to the released product. Notify local, provincial and/or federal authorities, if required |
|
spill or leak procdure |
Large spills may be neutralized with dilute alkaline solutions of soda ash or lime. Stop leak when safe to do so. Do not touch or walk through spilled material. |
|
Precautions for safe handling |
This material should be stored and shipped in plastic or plastic lined containers. Do not use with materials or equipment sensitive to acidic solutions |
|
Conditions for safe storage, including any incompatibilities |
Avoid contact with strong oxidizers, bases, and metals. Store in tightly closed containers in cool, dry area away from heat and incompatibles |
|
engineering controls |
General or local exhaust ventilation and other forms of engineering controls are the preferred means for controlling exposures. |
|
Eye/face protection |
Wear chemical safety goggles to prevent eye contact. Have eye washing facilities readily available where eye contact can occur |
|
Skin protection |
Avoid skin contact with this material. If skin contact is anticipated, protective clothing, including impervious gloves, should be worn. Protective glove materials include, but are not limited to natural rubber, neoprene or nitrile. |
|
Appearance |
Colourless |
|
Odour |
NA |
|
pH |
6-8 |
|
Melting point/freezing point |
-4 deegree |
|
Specific Gravity |
> 1 |
|
Bulk Density |
NA |
|
Flah Point |
NA |
|
Water solubility |
Complete soluble |
STABILITY/INCOMPATIBILITY:- Incompatible with bases, and oxidizers. Avoid contact with metals. See precautions under
Handling & Storage
| Skin contact |
may be irritating |
| Eye contact |
may be irritating |
|
inhaled |
Breathing of the mists, vapors or fumes may irritate the nose, throat and lungs. Symptoms may include sore throat, coughing, labored breathing, sneezing and burning sensation, depending on the concentration and duration of exposure. Overexposure to this material may cause systemic damage including target organ effects listed under "Toxicological Information |
| Potential routes of exposure | Inhalation, skin contact, eye contact |
| Potential effects of acute overexposure | Inhalation exposure may cause tingling, coughing, sneezing, and difficulty breathing. Symptoms of skin and eye contact may include redness and irritation. Ingestion may cause stomach pains, cramps, and gastritis. |
| Potential effects of chronic overexposure | Prolonged or repeated skin overexposure to this product may cause dermatitis (dry, red skin). Symptoms may include tingling, redness, and visible injury. |
| Symptoms of over-exposure | Immediate: Inhalation exposure may cause tingling, coughing, sneezing, and difficulty breathing. Symptoms of skin and eye contact may include redness and irritation.Ingestion may cause stomach pains, cramps, and gastritis. Delayed: Prolonged or repeated skin overexposure to this product may cause dermatitis (dry, red skin). Symptoms may include tingling, redness, and visible injury. |
| Conditions aggravated by overexposure | Preexisting dermatitis, other skin conditions, and respiratory conditions may be aggravated by exposures to this product. |
| Recommendations to physicians | Treat symptoms and eliminate exposure. |
| Irritation | YES This product can be irritating to contaminated tissue. |
| Sensitization | NO |
| Carcinogenicity | NO |
| Mutagenicity | NO |
| Reproductive toxicity | NO |
| Biological Exposure Index | N/A |
| Other potential health effects | Currently, there are no Biological Exposure Indices (BEIs) for any component of this product. |
| Ecotoxicity | No information available. |
| Persistence and Degradability | The components of this product decompose in soil and water. |
| Bioaccumulative Potential | The components of this product are not expected to bioaccumulate. |
| Mobility in Soil | When spilled onto soil, this product will infiltrate downward, the rate being greater with lower concentration because of reduced viscosity. During transport through the soil, this product will dissolve some of the soil material, in particular, carbonatebased materials. |
| Other adverse effects | This product may be harmful to aquatic life if large volumes of it are released into an aquatic environment. |
|
Preparing Wastes of this Product for Disposal |
Waste disposal must be in accordance with appropriate U.S. Federal, State, and local regulations or with local regulations. This product, if unaltered by the handling, may be disposed of by treatment at a permitted facility or as advised by your local waste regulatory authority. |
| Disposal of Contaminated Packaging | Cleaned containers can be recycled or disposed of as non-contaminated waste, if authorized by your local authorities. Dispose of containers as required by local regulations. |
| EPA Waste Number | Not applicable. |
DOT
| UN Number | Not applicable |
| Proper shipping name | Not applicable |
| Hazard Class | Not applicable |
| Packing group | Not applicable |
| Marine Pollutant NA Emergency Response Guide Number (2008) | Not applicable |
| Transport in Bulk (Annex II of MARPOL 73/78 and IBC Code) | Not applicable |
| Special Transport Precautions | Not applicable |
| National Motor Freight | #70 |
International Air Transport Association
| UN Number | Not applicable |
| Proper shipping name | Not applicable |
| Hazard Class | Not applicable |
| Packing group | Not applicable |
| IATA Emergency Response Code | Not applicable |
| Excepted Quantity | Not applicable |
International Maritime Organization
| UN Number | Not applicable |
| Proper shipping name | Not applicable |
| Hazard Class | Not applicable |
| Packing group | Not applicable |
| Marine Pollutant NA Emergency Response Guide Number (2008) | Not applicable |
| Transport in Bulk (Annex II of MARPOL 73/78 and IBC Code) | Not applicable |
| SARA 302 RQ | NO |
| SARA 302 TPQ | NO |
| SARA 313 LISTED | NO |
| SARA 311/312 ACUTE | NO |
| SARA 311/312 CHRONIC | YES |
| SARA 311/312 FIRE | NO |
| SARA 311/312 PRESSURE | NO |
| SARA 311/312 REACTIVITY | NO |
| EPA EXTREMELY HAZARDOUS SUBSTANCE | NO |
| WHMIS | E |
| DSL | YES |
| NDSL | N/A |
| REACH Pre-registered List | YES |
| TSCA | YES |
|
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if RX Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |