To prevent oil sludge deposits when feedwater becomes contaminated by oil. Boiler Coagulant prevents the formation of deposits on boiler internal surfaces. Sludge is kept dispersed in small particles and conditioned to be removed by normal blowdown. In this way tube overheating due to deposits is avoided.
Boiler Coagulant can also be used where minor oil contamination has been experienced, the oil being required to be coagulated for removal by blowdown. However, it must be noted that if oil contamination is continuous and excessive, off-line cleaning will be required. The source of oil contamination must be stopped immediately.
Boiler Coagulant initial dosage is 25 ml of treatment daily for every ton of boiler capacity. Daily bottom blowdown is required when using Boiler Coagulant.It must be dosed to boiler water that is maintained in an alkaline condition. For systems experiencing severe oil contamination, off-line cleaning is desirable. After the equipment is cleaned, dose rate of 25 mls per day per ton of water capacity for two weeks or until complete oil removal is accomplished. If severity of contamination persists, the possibility of additional oil in leakage should be investigated and eliminated.
Feeding: Boiler Coagulant may be dissolved with other boiler treatment chemicals and fed directly to the boiler by means of a bypass pot feeder or suitable chemical injection pump. For lowpressure boilers, the solution may be dosed to the hotwell or the condensate return tank.
Appearance: Clear, viscous liquid
Specific Gravity at 25° C (77° F): 1.0
pH: 6.9 - 10
Features and Benefit
- Liquid product, easy to feed.
- Prevents the formation of adherent deposits and sludges in boilers.
- Keeps sludge dispersed for efficient removal by blowdown.
- Keeps boilers clean and extends boiler operational time between cleaning.
- Used in conjunction with any products with RXSOL boiler water treatments.
- Used to coagulate small amounts of oil which have contaminated the boiler water.
RXSOL-50-5003-025 eliminate light oil contamination, A concentrated solution of surface-active polymers which is use as an internal sludge conditioners in boilers. Boiler Coagulant is a colorless, high molecular weight solution used in both medium and low-pressure boilers (<850 psig or 60 kg/cm2)
| Product Name | : | RXSOL-50-5003-025 |
| Product Type | : | BOILER COGULANT 25 Ltr |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Surat, Fujairah, Muscat
| Phone | : | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | : | +91 22 2781 1318 :::AOH :0091 9821214367 |
| : | mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
|
Sodium Acrylate |
5-10 |
25085-02-3 |
|
Non classified Proprietory ingredients |
>90 |
Proprietory |
*See Section 16
|
Odour |
Odourless |
|
Appearance |
Liquid, Clear / Slight yellow, soluble in water |
|
Contact with eyes |
Mildly irritating to eyes |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract |
|
Ingestion |
May cause gastro-intestinal disturbances |
|
Contact with skin |
Remove contaminated clothing immediately and drench affected skin with plenty of water. The wash with soap and water.Seek medical attention if irritation persists. |
|
Contact with eyes |
If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes.Seek medical attention if irritation persists. |
|
Ingestion |
Never make an unconscious person vomit or drink fluids.Give water or milk to drink.When in doubt or symptoms persist, seek medical attention |
|
Inhalation |
Inhalation is unlikely to occur.Remove patient to fresh air. |
|
General |
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible). |
- Non combustible
- None
- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions
|
Precautions |
Wear protective clothing as per section 8 |
|
Immediate Actions |
Shut off source of leak if safe to do so |
|
Clean Up Actions |
Flush spill area with copious amounts of water |
|
Special Precautions |
Wear protective clothing as per section 8 No special precautions are required for this product |
|
Handling |
The usual precautions for handling chemicals should be observed |
|
Storage |
Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost |
|
Exposure Limits |
There are no recommended or established controls for this product. |
|
Exposure controls |
No special precautions are required for this product. |
|
Occupational exposure controls |
Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended). |
Gloves Suit Goggles
|
Odour |
Odourless |
|
Appearance |
Liquid Clear Slight yellow, Soluble in water |
|
pH |
6.5 - 10 at 100 % concentration |
|
Boiling point > |
100 °C at 760 mm /Hg |
|
Vapour pressure - |
Not Known |
|
Freezing point |
0 °C at 760 mm/Hg |
|
Completely Soluble in water |
|
|
Specific gravity (water=1) |
1.12 |
|
Non combustible |
|
No hazardous decomposition products known . Avoid overheating, Keep away from frost.
|
Toxicological information |
LD50 (dermal) : > 10000 mg/kg |
|
Inhalation |
Inhalation is unlikely to occur |
|
Contact with skin |
In cases of severe exposure, irritation may develop |
|
Contact with eyes |
In cases of severe exposure, redness and irritation may develop |
|
Ingestion |
May cause gastro-intestinal disturbances |
|
Carcinogenicity |
No evidence of carcinogenic effects |
|
Ecotoxicity |
LC50 (bluegill sunfish)4750 mg/l(96 hr) (Sodium acrylate) |
|
Mobility |
Completely soluble in water |
|
Persistence and Biodegradability |
Most components in this product are not readily biodegradable. Sodium acrylate: Chemical oxygen demand (COD) 0.4 g/g Biological oxygen demand (BOD) 0.009 g/g |
|
Bioaccumulation Potential |
Bioaccumulation of the components in this product is insignificant. |
|
Other Adverse Effects |
Presents little or no hazard to the aquatic environment. |
|
Classification |
EU Waste class |
|
Disposal considerations |
Do not discharge into drains or the environment, dispose to an authorised waste collection point - Disposal should be in accordance with local, state or national legislation |
Not classified as hazardous for transport
|
Classification and labelling |
Not classified as hazardous for users |
|
Risk Phrases |
Not applicable |
|
Safety Phrases |
Not applicable |
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.