Developed specifically to perform as a multipurpose additive for distillate fuels such as gasoline, diesel oils, kerosene, furnace oils, jet fuels and turbine oils.
Fuel treated with BURNAID Rx Combustion Improver will result higher efficiency, better fuel economy, increased power and will enable the extension of operating time of fuel injectors, pistons, exhaust valves, turbocharges.
For best results, it should be dosed directly to bunker tanks or settling tank. The recommended dosage is 1 Ltr for 25 tonnes of fuel.
For Tank cleaning operation pl. click here to know more................
OTHER VALUABLE PRODUCTS :
| Product Name | RXSOL-70-7007-025 |
| Product Type | BURNAID Rx - II |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27815540 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmarine.com |
| Mixtures | |||||
|
Chemica Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Naphtha (petroleum), |
60-100% |
64742-82-1 |
265-185-4 |
65, 66 |
Xn |
*See Section 16
Harmful
| Classification of the substance or mixture | Counsil Directive 1999/45/EEC Classification, packing and labelling of dangerous preparations. |
| Label elements: | |
| Harmful | |
| Contains | Naphtha (petroleum), hydrodesulfurized heavy |
| Risk Phrases | |
| Harmful |
may cause lung damage if swallowed (R65) Repeated exposure may cause skin dryness or cracking (R66) |
| Safety Phrases |
Do not breathe spray/mists (S23) Do not breathe vapour/fumes (S23) Do not breathe fumes (S23) Avoid contact with skin (S24) If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label (S62) Wear suitable protective clothing, eye/face protection and gloves (S36/37/39) |
| Other hazards | |
| Odour | Characteristic odour, Smells of hydrocarbon |
| Appearance | Liquid, white, immiscible with water |
| Contact with eyes | Causes redness and irritation |
| Contact with skin | Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis |
| Inhalation | In cases of severe exposure, dizziness, confusion, headache or stupor may develop |
Description of first aid measures:
|
IF ON SKIN (or hair) |
Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.Contaminated clothing should be laundered before reuse. When in doubt or symptoms persist, seek medical attention. |
|
IF IN EYES |
Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate eyes thoroughly whilst lifting eyelids. When in doubt or symptoms persist, seek medical attention |
|
IF SWALLOWED |
rinse mouth. Do NOT induce vomiting. Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention. Give plenty of water to drink. Obtain immediate medical attention |
|
IF INHALED |
If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. When in doubt or symptoms persist, seek medical attention. |
|
Inhalation |
Remove patient to fresh air. Keep warm and at rest, in a half up right position. Loosen clothing.Seek medical attention if irritation persists |
| Most important symptoms and effects, both acute and delayed: | In cases of severe exposure, nausea/vomiting may develop. In cases of severe exposure, headache may develop. In cases of severe exposure, dizziness may develop. Possible redness and irritation of affected areas. The ingestion of significant quantities may cause damage to lungs |
Indication of immediate medical attention and special treatment needed
Extinguishing media
In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43).Do not use water jets
Special hazards arising from the substance or mixture
Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback
Advice for firefighters
Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback. Prevent run off water from entering drains if possible. Wear Breathing Apparatus
|
Personal Precautions |
Wear protective clothing as per section 8 |
|
Environmental Precautions |
Do not allow to enter public sewers and watercourses. Do not flush spilt material into any public water system |
| Methods and material for containment and cleaning up | Absorb spillage in inert material and shovel up. Ventilate the area and wash spill site after material pick-up is complete |
| Reference to other sections | None |
|
Handling |
Do not get in eyes, on skin, or on clothing.Do not breathe vapours excessively. Eyewash bottles should be available. Keep away from heat and sources of ignition - See Section 8. |
|
Storage |
Keep away from open flames, hot surfaces and sources of ignition. Store in a well-ventilated place. Keep container tightly closed. Keep cool.Keep only in original container. |
| Specific end use(s) | |
|
Control parameters |
Naphtha (petroleum),hydrodesulfurized heavy |
|
Exposure controls |
The undiluted product must not be used in a confined space without good ventilation. No special ventilation is required unless the product is used in a spray form. |
|
Occupational exposure controls |
No respiratory protection is required unless subject to contact with substance mist. Where an air-purifying respirator is suitable, use EN141 or EN405, type A. Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended) |
| Gloves Suit Goggles | No Smoking |
Gloves Suit Goggles No_Smoking
Information on basic physical and chemical properties:
|
Odour |
Smells of hydrocarbon |
|
Appearance |
Liquid, white, immiscible with water |
|
pH |
not applicable |
|
Boiling point |
176 °C to 217 °C at 760 mm /Hg |
|
Vapour pressure |
0,05 kPa @ 25 °C |
| Freezing point | -20 °C |
| Melting point | not known |
| Density | 0,81 g/cm3 at 15 deg C |
| Flash point | >62 deg C (CC) |
| Auto-ignition point | >200 deg C at 760 mm Hg |
| Lower explosive limit | 0.6 % (in air) |
| Upper explosive limit | 7 % (in air) |
| Viscosity | 1,54 cST @ 25 deg C |
| Other information | None |
|
Reactivity |
This article is considered stable under normal conditions |
| Chemical stability | This article is considered stable under normal conditions |
| Possibility of hazardous reactions | No hazardous reactions known if used for its intended purpose |
| Conditions to avoid | Avoid overheating. Keep away from naked flames, incandescent or hot surfaces |
| Incompatible materials | None |
| Hazardous Decomposition Products | No hazardous decomposition products known |
Information on toxicological effects
|
Inhalation |
Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. Inhalation of solvent vapours may give rise to nausea, headaches and dizziness |
|
Contact with skin |
Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis. Causes redness and irritation |
|
Contact with eyes |
Causes redness and irritation |
|
Ingestion |
The ingestion of significant quantities may cause damage to lungs |
| Carcinogenicity | No evidence of carcinogenic effects |
|
Toxicity |
LC50 96 hours fish 10-100 mg/l (Naphtha) |
|
Persistence and degradability |
BOD 28 >60% |
|
Bioaccumulation Potential |
Hydrocarbon solvents have the potential to bioaccumilate. |
|
Mobility in soil |
Insoluble in water |
| Results of PBT and vPvB assessment | Not a PBT according to REACH Annex XIII |
| Other Adverse Effects | No information available |
|
Waste treatment methods |
Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation.This material and/or its container must be disposed of as hazardous waste |
|
Classification |
EU Waste class: 07.01 |
UN Number
UN Proper Shipping Name
Transport hazard class(es)
Packing group
Environmental hazards
- Presents little or no hazard to the environment
Special precautions for user
- Not classified as hazardous for transport
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC code - Not applicable
Other information
Safety, health and environmental regulations/legislation specific for the substance or mixture
This Safety Data Sheet has been prepared in accordance with article 31 and annex II in REACH and Directive 453/2010/EU. Regulations 1272/2008/EEC. Classification, labeling and packing of dangerous substances and preparations This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC)
Chemical Safety Assessment None
Text of R and S phrase codes used in this safety data sheet:- R65: Harmful: may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of theindividual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.