BURNAID RX - I

Developed specifically to perform as a multipurpose additive for distillate fuels such as gasoline, diesel oils, kerosene, furnace oils, jet fuels and turbine oils.
Category

Burnaid is a concentrated organic combustion improver. It contains no metals and can be used in diesel engines and boilers. Developed specifically to perform as a multipurpose additive for distillate fuels such as gasoline, diesel oils, kerosene, furnace oils, jet fuels and turbine oils.

Application

The organic compounds in Burnaid promote improved combustion by reacting with fuel particles, thus lowering ignition temperatures. The result is less carbon deposits, soot and smoke. Engine and boiler combustion surfaces are kept cleaner. Sludge formation is inhibited through the action of anti-polymerization agents. Fuel stability is improved through the action of solvents and dispersants. The results are improved combustion efficiency and fuel atomization

Dose

Burnaid is completely oil soluble. The initial dosage rate is one liter to five tons of fuel. Actual dosage rates will be dependent on fuel quality and operating experience. Burnaid should be added via a metering pump. If no metering pump is available, use the suction manometer on the transfer pump as the dosage point. For diesel engines and boilers, Burnaid should be dosed during transfer from storage to the settling tank. Where fuel analysis for Micro Carbon Residue (MCR) is available, or where CCAI values are known, dose

Technical specifications

Product properties:-

APPEARANCE:

Clear, pale yellow liquid

DENSITY in g/cm3 at 15°C:

0.9

FLASH POINT (PMCC) °C:

Above 61

COMPATIBILITY:

 

Metal:

No known effect

Rubber:

May swell

Synthetic rubber:

May swell

Note

Features, Benefits and Applications

  • Improves combustion
  • Reduces carbon deposits
  • Limits soot formation
  • Limits smoke emissions
  • Reduces corrosion in tanks and fuel lines
  • Conditions sludge in fuel
  • Improves fuel stability
  • Contains no metals
  • Reduces the demand for excess air in boilers
  • Improves boiler efficiency
Remarks / Precaution

Packing sizes
25 ltr, 210 ltr
MSDS

Product Name RXSOL-70-7007-020
Product Type BURNAID Rx - I

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27815540
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com
Website www.rxmarine.com

Mixtures

Chemica Name

Concentration

CAS Number

EC Number

R Phrases*

Symbols

Naphtha (petroleum),
hydrodesulfurized heavy

60-100%

64742-82-1

265-185-4

65, 66

 Xn

*See Section 16

harmful

Harmful

Classification of the substance or mixture Counsil Directive 1999/45/EEC Classification, packing and labelling of dangerous preparations.
Label elements:  
Harmful  
Contains Naphtha (petroleum), hydrodesulfurized heavy
Risk Phrases
Harmful may cause lung damage if swallowed (R65)
Repeated exposure may cause skin dryness or cracking (R66)
Safety Phrases Do not breathe spray/mists (S23)
Do not breathe vapour/fumes (S23)
Do not breathe fumes (S23)
Avoid contact with skin (S24)
If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label
(S62)
Wear suitable protective clothing, eye/face protection and gloves (S36/37/39)
Other hazards
Odour Characteristic odour, Smells of hydrocarbon
Appearance Liquid, white, immiscible with water
Contact with eyes Causes redness and irritation
Contact with skin Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis
Inhalation In cases of severe exposure, dizziness, confusion, headache or stupor may develop

Description of first aid measures:

IF ON SKIN (or hair)

Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.Contaminated clothing should be laundered before reuse. When in doubt or symptoms persist, seek medical attention.

IF IN EYES

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Irrigate eyes thoroughly whilst lifting eyelids. When in doubt or symptoms persist, seek medical attention

IF SWALLOWED

rinse mouth. Do NOT induce vomiting. Do not induce vomiting because of risk of aspiration into the lungs. If aspiration is suspected obtain immediate medical attention. Give plenty of water to drink. Obtain immediate medical attention

IF INHALED

If breathing is difficult, remove to fresh air and keep at rest in a position comfortable for breathing. When in doubt or symptoms persist, seek medical attention.

Inhalation

Remove patient  to fresh air. Keep warm and at rest, in a half up right position. Loosen clothing.Seek medical attention if irritation persists

Most important symptoms and effects, both acute and delayed: In cases of severe exposure, nausea/vomiting may develop. In cases of severe exposure, headache may develop. In cases of severe exposure, dizziness may develop. Possible redness and irritation of affected areas. The ingestion of significant quantities may cause damage to lungs

Indication of immediate medical attention and special treatment needed

Extinguishing media    
In case of fire use water spray or fog, alcohol resistant foam, dry chemical or carbon dioxide (S43).Do not use water jets
Special hazards arising from the substance or mixture    
Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback
Advice for firefighters    
Vapours are heavier than air and may travel considerable distances to a source of ignition and flashback. Prevent run off water from entering drains if possible. Wear Breathing Apparatus

Personal Precautions

Wear protective clothing as per section 8

Environmental Precautions

Do not allow to enter public sewers and watercourses. Do not flush spilt material into any public water system

Methods and material for containment and cleaning up Absorb spillage in inert material and shovel up. Ventilate the area and wash spill site after material pick-up is complete
Reference to other sections None

Handling

Do not get in eyes, on skin, or on clothing.Do not breathe vapours excessively. Eyewash bottles should be available. Keep away from heat and sources of ignition - See Section 8.

Storage

Keep away from open flames, hot surfaces and sources of ignition. Store in a well-ventilated place. Keep container tightly closed. Keep cool.Keep only in original container.

Specific end use(s)

Control parameters

Naphtha (petroleum),hydrodesulfurized heavy
TLV (TWA) 275 mg/m3 (Naphtha (petroleum) hydrodesulfurized heavy)

Exposure controls

The undiluted product must not be used in a confined space without good ventilation. No special ventilation is required unless the product is used in a spray form.

Occupational exposure controls

No respiratory protection is required unless subject to contact with substance mist. Where an air-purifying respirator is suitable, use EN141 or EN405, type A. Wear suitable protective clothing, including eye/face protection and gloves (neoprene or nitrile are recommended)

Gloves Suit Goggles No Smoking

                                            gloves                                        goggles                    no_smoking

                                              Gloves                            Suit                          Goggles                   No_Smoking

Information on basic physical and chemical properties:

Odour

Smells of hydrocarbon

Appearance

Liquid, white, immiscible with water

pH

not applicable

Boiling point

176 °C to 217 °C at 760 mm /Hg

Vapour pressure

0,05 kPa @ 25 °C

Freezing point -20 °C
Melting point not known
Density 0,81 g/cm3 at 15 deg C
Flash point >62 deg C (CC)
Auto-ignition point >200 deg C at 760 mm Hg
Lower explosive limit 0.6 % (in air)
Upper explosive limit 7 % (in air)
Viscosity 1,54 cST @ 25 deg C
Other information None

Reactivity

This article is considered stable under normal conditions

Chemical stability This article is considered stable under normal conditions
Possibility of hazardous reactions No hazardous reactions known if used for its intended purpose
Conditions to avoid Avoid overheating. Keep away from naked flames, incandescent or hot surfaces
Incompatible materials None
Hazardous Decomposition Products No hazardous decomposition products known

Information on toxicological effects

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract. Inhalation of solvent vapours may give rise to nausea, headaches and dizziness

Contact with skin

Prolonged skin contact will result in defatting of the skin, leading to irritation, and in some cases, dermatitis. Causes redness and irritation

Contact with eyes

Causes redness and irritation

Ingestion

The ingestion of significant quantities may cause damage to lungs

Carcinogenicity No evidence of carcinogenic effects

Toxicity

LC50 96 hours fish 10-100 mg/l (Naphtha)

Persistence and degradability

BOD 28 >60%

Bioaccumulation Potential

Hydrocarbon solvents have the potential to bioaccumilate.

Mobility in soil

Insoluble in water

Results of PBT and vPvB assessment Not a PBT according to REACH Annex XIII
Other Adverse Effects No information available

Waste treatment methods

Do not discharge into drains or the environment, dispose to an authorised waste collection point.Disposal should be in accordance with local, state or national legislation.This material and/or its container must be disposed of as hazardous waste

Classification

EU Waste class: 07.01

UN Number
UN Proper Shipping Name
Transport hazard class(es)
Packing group

Environmental hazards
- Presents little or no hazard to the environment
Special precautions for user
- Not classified as hazardous for transport
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC code - Not applicable
Other information

Safety, health and environmental regulations/legislation specific for the substance or mixture
This Safety Data Sheet has been prepared in accordance with article 31 and annex II in REACH and Directive 453/2010/EU. Regulations 1272/2008/EEC. Classification, labeling and packing of dangerous substances and preparations This Safety Data Sheet is provided in compliance with The Dangerous Substances Directive (67/548/EEC)
Chemical Safety Assessment None

Text of R and S phrase codes used in this safety data sheet:- R65: Harmful: may cause lung damage if swallowed; R66: Repeated exposure may cause skin dryness or cracking. The information provided about the product on this Safety Data Sheet has been compiled from knowledge of theindividual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com