RXSOL-20-2028-020 is a very strong cleaner, which can be used to soften up / remove baked on drying oils and used after animal and vegitable oils, fish oils, tall oils, tug oils etc .It is low toxic product with an exceptional solvency power on soil & oily matter. It is free from hydrocarbon solvents, Biodegradable minimizes the extreme hazards to personnel in handling materials.
PACKAGING : 25 ltrs, 210 ltrs
Suitable for cleaning of Lube oils Gas oil Kerosene Mineral oil Products. Phthalates paraffin's vegetable oils Odour intensive products.
Using-Procedure:-First of all flush the system with cold water to prevent evaporation rates and polymerization then the most economical method of usin RXSOL-20-2028-210 is by direct injection followed by recirculation washing, using tank cleaning machines.
Spraying Method:-Using CTC as delivered in drums, spray onto areas where residue remains following rough washing leave for 10-45 minutes (but do not allow to dry), then butterworth at maximum pressure and warm water 60oC for at least 3 hours, checking that there is no foam remaining in the final stages. Inspects tanks(s) and if desired result has been achieved fresh water rinse and dry.
**Make sure to take all safety precautions are followed when handling / spraying CTC**
Injection Method:- Not applicable.
Re- Circulation Method:- Fill tank with fresh water and heat up to warm 50oC . IF a drop line is available on the tank line system, then start to circulate the water and add the required amount of Caustic flakes and CTC to make a 2.5% solution. A stronger solution can be made, but be advised that too much Caustic and too high temperature will result in white powder all over the tank. Under normal circumstances, between 2.5% and 4.5% will be sufficient strength. If there is no drop line, then lower butterworth hoses into the tank from the pump stack header without machines attached and circulate through these hoses while you fill the solution material.
**Use a strainer at the pump stack when circulating any solution.** Tank Lining– Stainless / Epoxy / Phenolic.
Necessary concentration in water only 0,2 to 0,4 %
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- Effective and economical in use , Water-based cleaner.
- RXSOL-20-2028-210 has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents.
Note:- Acts as an acid-neutralizing agent also.
| Product Name | RXSOL VOLC CTC-I |
| Product Type | RXSOL-20-2028-020 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 / 27611360 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Chemical Name |
Concentration |
CAS Number |
EC Number |
R Phrases* |
Symbols |
|
Faty alcohal ethoxylate |
Mix |
|
|
22-36/38 |
Xn |
*See Section 16
|
Environmental Hazards |
None |
|
Human Health Hazards |
Moderates |
|
NOTE |
Person-related safety precautions |
|
After inhalation |
On Inhalation move to fresh air / Arificial respiration . Get medical attention. |
|
After skin contact |
Instantly wash with water and soap and rinse thoroughly. Generally Non Irritating , Protective clothing require. |
|
After eye contact |
Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. |
|
After swallowing |
Harmful, if ingested,Do not induce Vomiting. Get medical attention. |
Extinguishing Media:-
|
A. Suitable Foam |
dry Co2, water spray |
|
B. Not suitable |
Not applicable |
|
C. Special |
Not applicable |
|
|
Do not use Direct water jet |
|
Protection of fire |
Fighter Masked with Air Respirator |
Care for environmental protection Prevent material from reaching sewage system, holes and cellars. Dilute with much water.PROCEDURE for cleaning/collecting Remove RXSOL VOLC with absorbent materials or mechanically .And dispose accordance with section ,Then flush with water and ventilate well.NOTE Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
|
Handling |
Eyewash facilities require at workplace. |
|
Storage |
General Storage , container should be tightly. |
|
Methods of cleaning |
Flush Spill Area with Water. |
|
Note |
Keep Container Tightly Closed. |
|
Enviromental Precaution |
Readily Bio-Degradable , missible with water , low toxicity , No environmental problem on correctly usage. |
|
Personal Protection |
|
|
Respiratory System Protection |
Breathing equipment Not required |
|
Eye Protection |
wear eye protection (on possibility of contact) |
|
NOTE |
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace. |
|
Wash hands during breaks and at the end of the work. Avoid contact with the eyes and skin.Keep away from foodstuffs, beverages and food. |
|
|
Protection of hands |
Protective gloves |
|
Eye protection |
Tightly sealed safety glasses |
PRODUCT PROPERTIES:-
|
Appearance |
Clear liquid / Low viscous |
|
|
Odour |
Characteristic / Odorless |
|
|
Density |
In g/cm3 at 15°C: 1.00 |
NOTE : SHELF LIFE 10 YEARS |
|
Boiling Point |
MATERIALS BOILS AT 100°C |
EFFICIENCY : |
|
Compatibility |
|
A . SEA WATER 68% |
|
Metal: |
No known effect |
B. FRESH WATER 78% |
|
pH |
6 +0.5 |
B . FRESH WATER 98.8 % |
|
Packaging |
Order No.: |
Size (in litres) |
|
|
RXSOL-20-2028-020 |
25 , 30 , 210 |
|
TOXICITY LC50 (After 96 hours ) |
IN CONCENTRATE 4460 PPM SLIGHT TOXIC. |
IN DILUTE 9800 PPM PRACTICALLY NON TOXIC . |
|
Condition to Avoid |
Heat, Flame & Other Sources of Ignition |
|
Materials to Avoid |
Do not subject to Reducing /Oxidizing Agents. |
|
Hazardous Decomposition Products |
Do not occur |
|
NOTE |
No decomposition if used according to specifications |
|
Skin Irritation |
Irritant wash with soap water |
|
Eye Irritat |
Moderate irritant , flush with copious amounts of water |
|
Sensitization |
Not Sensitizing . |
|
(All above information as per data available with us) |
|
|
Comment |
Not applicable |
|
Ecotoxicity |
Not applicable , Readily biodegradable |
|
Water hazard class 2 (self-assessment) |
Hazardous for water. |
|
Do not allow product to reach ground water, water bodies or sewage system..Danger to drinking water if even small quantities leak into soil. |
|
This material must be disposed with local national regulations. Product Recommendation Can be burnt under adherence to the necessary technical regulations. Disposal must be made according to official regulations.
Marine pollutant: No.Transport/Additional information Not Dangerous
Hazard designation of product: Xi Irritant.
Irritating to eyes and skin.
Safety phrases
2Keep out reach of children
If swallowed, seek medical attention immediately
26In case of contact with eyes, rinse immediately with plenty of water and
seek medical attention.
27After contact with skin, wash immediately with plenty of water and soap and rinse thoroughly.
4.National regulations
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not establish a legally valid contractual relationship. Department issuing data specification sheet Environment protection department.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.