It is a Silicon based versatile liquid capable of effectively removing entrapped air from all types of water based mud under severe field conditions in a wide range of operations. It is utilized to reduce surface tension in water based drilling fluids as well as solids free work over and completion fluids. It is Effective at high temperature and at different PH of water based mud. It tolerates high concentration of salts.
It is normally utilized to reduce and control the foaming in brines. It is a silicon based anti foam agent utilized in silicate mud system.
|
Physical Properties |
|
|
Properties |
Value |
|
Appearance |
Creamy white Liquid |
|
Specific Gravity |
1.02 -1.05 |
|
Flash point |
90 -100 ° F |
|
Character |
Non- Ionic |
|
PH Value |
6-7 |
Advantages
It controls foaming in dispersed and non dispersed drilling fluid systems.
It effectively defoams mud containing fresh water or sea water.
It controls foaming in fluid viscosities with polymer.
Helps stabilize pump pressure by removing trapped air a
nd gas, and it is environmentally safe
RXSOL BRAND Oilfield Chemical Products Company and supplier in Mussafah Industrial Area Abudhabi, Dubai, Sharjah, Ajman, Fujairah UAE, Muscat Barka Sohar Oman.
| Product Name | Defoamer Silicate Based |
| Product Type | RXSOL-81-8127-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 27815540 / 41 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Name | CAS No | Weight Percentage |
| Polydimethylsiloxane Silicone Glycol Compound |
67762-90-7 |
30 - 40 |
| IF IN EYES | Rinse with water for several minutes. Repeat if needed. |
| IF ON SKIN | Wash with plenty of soap and water. |
|
Inhalation |
No first aid should be needed. If discomfort occurs, remove to fresh air. |
| Ingestion | No first aid should be needed. If discomfort occurs, obtain medical attention. |
|
Eye Contact |
No first aid should be needed. If discomfort occurs, flush with water. |
|
Skin Contact |
No first aid should be needed. |
|
|
No first aid should be needed. If discomfort occurs, remove to fresh air. |
|
Inhalation |
Never give anything by mouth to an unconscious person. Rinse mouth with water. |
| Ingestion | No first aid should be needed. If discomfort occurs, obtain medical attention. |
| Suitable Extinguishing Media | Carbon dioxide, dry powder, foam, or water spray. Water can be used to cool fire exposed containers. |
| Unsuitable Extinguishing Media | None known |
| Specific Hazards Arising from the Chemical | Silicon Dioxide. Carbon oxides and traces of incompletely burned carbon compounds. |
| Special Protective Actions for Fire-Fighters | Self-contained breathing apparatus and protective clothing should be worn in fighting fires involving chemicals. Use water spray to cool fire exposed containers. |
Personal Precautions and Protective Equipment:
Avoid eye and skin contact. Use personal protective equipment.
Environmental Precautions:
Prevent from entering drains or water sources.
Containment/Clean up:
Collect for disposal. Clean up remaining materials from spill with suitable absorbent. For large spills provide diking or other appropriate containment to keep material from spreading. If diked material can be pumped, store recovered material in appropriate container. Clean area as appropriate since some silicone material, even in small quantities, may present a slip hazard. Final cleaning may require steam, solvents or detergents.
|
Handling Precautions |
Avoid eye and skin contact. Do not take internally. Use with adequate ventilation. Wash after handling.Exercise good industrial hygiene practice. |
| Storage Conditions | Keep container tightly closed and away from oxidizing materials. |
|
Engineering Controls |
|
| Local Ventilation |
None should be needed. |
| Personal Protective Equipment: |
|
| Respiratory protection | In the case of vapour formation use a respirator with an approved filter. |
| Hand protection | Gloves are not normally required. |
| Eye protection | Safety glasses should be worn. |
| Skin protection | Protective equipment is not normally required. |
| Hygiene measures | Observe good industrial hygiene practices. Wash after handling. |
| Appearance | Hazy Viscouis Liquid |
| Colour | Tan |
| Odour | Mild |
| Odour Threshold | Not determined |
| Flash Point | >100oC (Pensky-Martens closed cup) |
| Flammability | Not determined |
| Flammability Limits | Not determined |
| Auto-ignition Temperature | Not determined |
| Decomposition Temperature | Not determined |
| Specific Gravity @25oC | 1.00 |
| Solubility in Water | Dispersible |
| Viscosity@25oC | Not determined |
| Melting/Freezing Point | Not determined |
| Initial Boiling Point | >100oC @ 760 mmHg |
| Boiling Range | Not determined |
| Explosive Properties | No |
| Vapour Pressure @25oC | Not determined |
| Vapour Density | Not determined |
| Partion Coefficient | Not determined |
| pH | Not determined |
| Oxidising Properties | No |
| Evaporation Rate | Not determined |
|
Chemical Stability |
Stable |
|
Possibility of Hazardous Reactions |
Hazardous polymerization will not occur. |
|
Conditions to Avoid |
None known |
|
Incompatible Materials |
Strong oxidizing material can cause a reaction |
| Hazardous decomposition products | |
| The following decomposition products may form during fire or at very high temperatures: | Carbon Oxides, Silicon dioxide, Formaldehyde, and traces of incompletely burned carbon compounds. |
| IF IN EYES | Rinse with water for several minutes. Repeat if needed. |
| IF ON SKIN | Wash with plenty of soap and water. |
|
Inhalation |
No first aid should be needed. If discomfort occurs, remove to fresh air. |
| Ingestion | No first aid should be needed. If discomfort occurs, obtain medical attention. |
| Ecotoxicity: | |
| Environmental Effects | |
| Acute | No adverse effects on aquatic organisms. |
| Chronic | No adverse effects on aquatic organisms. |
| Persistnce and degradability: | |
| Degradation | In soil, siloxanes are degraded. |
| Environmental Fate and Distribution | Siloxanes are removed from water by sedimentation sewage or binding to sludge. |
| Bioaccumulative potential: | |
| Bioaccumulation | No bioaccumulation potential. |
|
Product Disposal |
Do not dispose of waste into sewer. Dispose of in accordance with local regulations. |
| Packaging Disposal | Dispose of in accordance with local regulations. |
NA
NA
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall RX MARINE International be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if rxmarine.com has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.