A premium class Fuel Oil demulsifier of specialty chemicals used to separate emulsions for example water in oil.
Category
Demulsifier Fuel Oil Premium Demulsifier breaks water-in-oil emulsions by lowering the surface tension between the two phases. It is insoluble in water and remains effective even after the water has been removed.
Application
It is insoluble in water and remains effective even after the water has been removed. Powerful dispersants combat existing sludge formations while homogenising the fuel to prevent new sludge from being formed. Centrifugal separation of catalyst fines is improved, reducing abrasion damage. The homogenising action of RXSOL Demulsifier keeps heavy fuel particles in suspension, therefore fuel filters block less frequently, tanks and lines remain cleaner, and in general, fuel systems maintenance is minimised. Consequently, a greater proportion of supplied fuel is available for combustion.
Dose
Dosage and control Dose into the bunker tank prior to, or during bunkering. Allow the product to mix well with the fuel. If fuel analysis is available, the dosage should be based on the water content, as per the following table:
| Water %Vol | 0.5-1.0 | 1.0-2.0 | Above 2.0 |
| Dosage | 1:6000 | 1:3000 | 1:2000 to 1:500 |
Use an initial dose rate of 1:6000 and adjust according to the results obtained. Dose can be customized as per required vallue
Technical specifications
Physical properties
| Appearance | Yellow |
| Density [kg/dm3] | 0,9 |
| Flash Point [°C] | >61 |
| Form | Liquid |
Note
Features
- Rapidly breaks water-in-oil emulsions
- Improves separator efficiency
- Prevents sludge formation in tanks and lines
Benefits
- Helps you to keep your fuel as water free as possible
- Reduction in sludge reduces your maintenance requirements
Remarks / Precaution
RXSOL Demulsifier Fuel Oil Premium Prevents sludge formation in tanks and lines.
MSDS
| Porduct Name | Demulsifiers |
| Part Number | RXSOL-81-3733-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Branch : Kandla, Mumbai , Chennai, Vizag, Kolkata, UAE , OMAN , CANADA and KENYA
| Phone | +91 22 20871200 - 1400 |
| Fax | +91 22 27612100 :::AOH :0091 9821214367 |
| mail@rxmarine.com | |
| Website | www.rxmraine.com |
| Chemical Name | Cas No | EC No | Weight | Formula |
| Hydrocarbons, C10-C13, n-alkanes, isoalkanes, cyclics, aromatics (2-25%)- | - | 919-164-8 | 60-100 | - |
| Signal Word | Danger |
| Hazard Statements | H372 Causes damage to organs through prolonged or repeated exposure. (Nervous system) (Inhalation) H304 May be fatal if swallowed and enters airways. H412 Harmful to aquatic life with long lasting effects |
| Precautionary statements | P101 If medical advice is needed, have product container or label at hand. P102 Keep out of reach of children. P103 Read carefully and follow all instructions. |
| Classification of the substance or mixture | No data available |
| Supplemental Hazard Statements | No data available |
| Other hazards | The mixture does not contain Substances of Very High Concern (SVHC) at the SDS print date. |
| General advice | No data available |
| If inhaled | No data available |
| Eye Contact | Wash out immediately with fresh running water. Ensure complete irrigation of the eye by keeping eyelids apart and away from eye and moving the eyelids by occasionally lifting the upper and lower lids. Seek medical attention without delay; if pain persists or recurs seek medical attention. Removal of contact lenses after an eye injury should only be undertaken by skilled personnel |
| Swallowed | After swallowing make victim drink water (two glasses at most). Consult doctor if feeling unwell. |
| Skin Contact | Immediately remove all contaminated clothing, including footwear. Flush skin and hair with running water (and soap if available). Seek medical attention in event of irritation |
| Inhalation | If fumes, aerosols or combustion products are inhaled remove from contaminated area. Other measures are usually unnecessary. |
| Ingestion | Immediately give a glass of water. First aid is not generally required. If in doubt, contact a Poisons Information Centre or a doctor. If spontaneous vomiting appears imminent or occurs, hold patient's head down, lower than their hips to help avoid possible aspiration of vomitus. |
| Most important symptoms and effects, both acute and delaye | The most important known symptoms and effects are described in the labelling (see section 2.2) and/or in section 11 |
| Indication of any immediate medical attention and special treatment needed | Any material aspirated during vomiting may produce lung injury. Therefore emesis should not be induced mechanically or pharmacologically. Mechanical means should be used if it is considered necessary to evacuate the stomach contents; these include gastric lavage after endotracheal intubation. If spontaneous vomiting has occurred after ingestion, the patient should be monitored for difficult breathing, as adverse effects of aspiration into the lungs may be delayed up to 48 hours. |
| Flammability | No data available |
| Suitable extinguishing media | Foam. Dry chemical powder. BCF (where regulations permit).Carbon dioxide. Water spray or fog - Large fires only. |
| Unsuitable extinguishing media | No data available |
| Special hazards arising from the substance or mixture | No data available |
| Further information | No data available |
|
Hazardous combustion products |
Combustible. Slight fire hazard when exposed to heat or flame. Heating may cause expansion or decomposition leading to violent rupture of containers. On combustion, may emit irritating/ toxic fumes. May emit acrid smoke. Mists containing combustible materials may be explosive. May emit poisonous fumes. May emit corrosive fumes |
| Advice for firefighters | Alert Fire Brigade and tell them location and nature of hazard. Wear full body protective clothing with breathing apparatus. Prevent, by any means available, spillage from entering drains or water course. Use water delivered as a fine spray to control fire and cool adjacent area. Avoid spraying water onto liquid pools. DO NOT approach containers suspected to be hot. Cool fire exposed containers with water spray from a protected location |
| Protective Equipment | No data available |
| Specific Hazards Arising from the Chemical | No data available |
| Personal precautions, protective equipment and emergency procedures | See section 8 |
| Spillage | No data available |
| Personal Protection | No data available |
| Enviromental Precaution | See section 12 |
|
Methods and materials for containment and cleaning |
Remove all ignition sources. Clean up all spills immediately. Avoid breathing vapours and contact with skin and eyes. Control personal contact with the substance, by using protective equipment. Contain and absorb spill with sand, earth, inert material or vermiculite. Wipe up. Place in a suitable, labelled container for waste disposalModerate hazard. Clear area of personnel and move upwind. Alert Fire Brigade and tell them location and nature of hazard. Wear breathing apparatus plus protective gloves. Prevent, by any means available, spillage from entering drains or water course. No smoking, naked lights or ignition sources. Increase ventilation. |
| Reference to other sections | Personal Protective Equipment advice is contained in Section 8 of the SDS. |
| Advice on protection against fire and explosion | See section 5 |
| Incompatible materials | No data available |
| Hygiene measures | Immediately change contaminated clothing. Apply preventive skin protection. Wash hands and face after working with substance. For precautions see section 2.2 |
| Advice on safe handling | Avoid all personal contact, including inhalation. Wear protective clothing when risk of exposure occurs. Use in a well-ventilated area. Prevent concentration in hollows and sumps. DO NOT enter confined spaces until atmosphere has been checked. Avoid smoking, naked lights or ignition sources. Avoid contact with incompatible materials. DO NOT allow clothing wet with material to stay in contact with skin |
| Conditions for safe storage, including any incompatibilities |
Store in original containers. Keep containers securely sealed. No smoking, naked lights or ignition sources. Store in a cool, dry, well-ventilated area. Store away from incompatible materials and foodstuff containers. Protect containers against physical damage and check regularly for leaks. Observe manufacturer's storage and handling recommendations contained within this SDS |
| Storage conditions | Metal can or drum Packaging as recommended by manufacturer. Check all containers are clearly labelled and free from leaks. |
| Storage class | No data available |
| Specific end use(s) | See section 1.2 |
| Advice on general occupational hygiene | No data available |
| Exposure controls | Personal protective equipment |
| Engineering Control | Engineering controls are used to remove a hazard or place a barrier between the worker and the hazard. Well-designed engineering controls can be highly effective in protecting workers and will typically be independent of worker interactions to provide this high level of protection. The basic types of engineering controls are: Process controls which involve changing the way a job activity or process is done to reduce the risk. Enclosure and/or isolation of emission source which keeps a selected hazard "physically" away from the worker and ventilation that strategically "adds" and "removes" air in the work environment. Ventilation can remove or dilute an air contaminant if designed properly. The design of a ventilation system must match the particular process and chemical or contaminant in use. Employers may need to use multiple types of controls to prevent employee overexposure. |
| Eye/face protection | Safety glasses with side shields. Chemical goggles. Contact lenses may pose a special hazard; soft contact lenses may absorb and concentrate irritants. A written policy document, describing the wearing of lenses or restrictions on use, should be created for each workplace or task. This should include a review of lens absorption and adsorption for the class of chemicals in use and an account of injury experience. Medical and first-aid personnel should be trained in their removal and suitable equipment should be readily available. In the event of chemical exposure, begin eye irrigation immediately and remove contact lens as soon as practicable |
| Body Protection | Overalls. P.V.C apron. Barrier cream. Skin cleansing cream. Eye wash unit. |
| Skin protection | Wear chemical protective gloves, e.g. PVC. Wear safety footwear or safety gumboots, e.g. Rubber The selection of suitable gloves does not only depend on the material, but also on further marks of quality which vary from manufacturer to manufacturer. Where the chemical is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time for substances has to be obtained from the manufacturer of the protective gloves and has to be observed when making a final choice. Personal hygiene is a key element of effective hand care. Gloves must only be worn on clean hands. After using gloves, hands should be washed and dried thoroughly. Application of a non-perfumed moisturiser is recommended. |
| Respiratory protection |
Recommended Filter type Filter A-(P3) The entrepeneur has to ensure that maintenance, cleaning and testing of respiratory protective devices are carried out according to the instructions of the producer. These measures have to be properly documented.
|
| Other Protection Measure | No data available |
| Physical state | Liquid |
| Colour | Pale yellow |
| Odour | Ether-like |
| Odor Threshold | No data available |
| pH | No data available |
| Melting Point | No data available |
| Boiling Point | 150-230 |
| Flash Point | >62 |
| Evaporation Rate | No data available |
| Flammability (solid, gas) | No data available |
| Explosive limits | No data available |
| Upper/lower flammability or explosive limits | Upper explosion limit:7 Lower explosion limit 0.6 |
| Autoignition temperature | >200 |
| Decomposition temperature | No data available |
| Vapour pressure | No data available |
| Viscosity | No data available |
| Density | No data available |
| Relative Density | 0.83 |
| Specific Gravity | No data available |
| Partition coefficient | No data available |
| Explosive properties | No data available |
| Solubility | No data available |
| Ignition temperature | No data available |
| Particle characteristics | No data available |
| Reactivity | See section 7.2 |
| Chemical stability | Unstable in the presence of incompatible materials. Product is considered stable. Hazardous polymerisation will not occur. |
| Possibilityof hazardous reactions | See section 7.2 |
| Condition to avoid | See section 7.2 |
| Incompatible materials |
See section 7.2
|
| Hazardous product dicomposition | See section 5.3 |
| Acute toxicity | Dermal (Other) LD50: >3400 mg/kg[2] Not Available Inhalation(Rat) LC50; 13,1 mg/kg[2] Oral (Rat) LD50; >15000 mg/kg[2] |
| Skin corrosion/irritation | No data available |
| Serious eye damage/irritation | No data available |
| Respiratory or skin sensitization | No data available |
| Carcinogenicity | No data available |
| Germ cell mutagenicity | No data available |
| Reproductive toxicity | No data available |
| Specific target organ toxicity-single exposure |
No data available
|
| Additional Information | No data available |
| Persistence and degradability | No data available |
| Toxicity to fish | No data available |
| Toxicity to daphnia and other aquatic invertebrates | No data available |
| Toxicity | No data available |
| Toxicity to bacteria | No data available |
| Toxicity to algae | No data available |
| Mobility in soil | No data available |
| Results of PBT av PvB assessment | No data available |
| Endocrine disrupting properties | No data available |
| Other adverse effects | No data available |
| Product | Legislation addressing waste disposal requirements may differ by country, state and/ or territory. Each user must refer to laws operating in their area. In some areas, certain wastes must be tracked. A Hierarchy of Controls seems to be common - the user should investigate: Reduction Reuse Recycling Disposal (if all else fails) This material may be recycled if unused, or if it has not been contaminated so as to make it unsuitable for its intended use. If it has been contaminated, it may be possible to reclaim the product by filtration, distillation or some other means. Shelf life considerations should also be applied in making decisions of this type. Note that properties of a material may change in use, and recycling or reuse may not always be appropriate. DO NOT allow wash water from cleaning or process equipment to enter drains. It may be necessary to collect all wash water for treatment before disposal. In all cases disposal to sewer may be subject to local laws and regulations and these should be considered first. Where in doubt contact the responsible authority. Recycle wherever possible or consult manufacturer for recycling options. Consult State Land Waste Management Authority for disposal. Bury residue in an authorised landfill. Recycle containers if possible, or dispose of in an authorised landfill |
| Contaminated packaging | No data available |
| Waste treatment Method | No data available |
| UN number | ADR/RID: | IMDG: | IATA: |
| UN proper shipping name | ADR/RID:Not dengerous goods | IMDG:Not dengerous goods | IATA:Not dengerous goods |
| Transport hazard classess | ADR/RID: | IMDG: | IATA: |
| Packaging group | ADR/RID: | IMDG: | IATA: |
| Environmental hazards | ADR/RID:No | IMDG:No | IATA:No |
| Special precautions for user | No data available | ||
| Further information | No data available |
| Safety, health and environmental regulations/legislation specific for the substance or mixture | This safety data sheet is in compliance with the following EU legislation and its adaptations - as far as applicable - : Directives 98/24/EC, - 92/85/EEC, - 94/33/EC, - 2008/98/EC, - 2010/75/EU; Commission Regulation (EU) 2020/878; Regulation (EC) No 1272/2008 as updated through ATPs |
| Other regulations | No data available |
| Chemical Safety Assessment | No Chemical Safety Assessment has been carried out for this substance/mixture by the supplier. |
| Other Information |
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and weassume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if Rx Marine International has been advised of the possibility of such damages. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |