Name: Iron Ore Red Dust Cleaner
Brand: Kolkata Chemical
Availability: InStock

Excellent pre treatment and binder for metal surfaces to be painted. Concentrated blend of RXSOL proprietory formulated various products, which is specifically designed for the rapid removal of rust, while providing phosphatized ferrous metal surfac

Category

Ship Hold Cleaner

Iron Ore Red Dust Cleaner manufacturer, supplier and exporter. Iron Ore Red Dust Cleaner is advanced blend of non corrosive cleaner with additional base and inhibitor. Its powerful chemical rust removal action dissolves rust without any mechanical action. This is the reason why Iron Ore Red Dust Cleaner used in removal of iron ore stain without reaction on paint, rubber, plastic and glass. Iron Ore Red Dust Cleaner is frequently used in the mining and construction industry and also most commonly use to clean SHIP HOLD after disharging of IRON ORE.

Application

Test Iron Ore Red Dust Cleaner on a small inconspicuous area before use.
Do not apply Iron Ore Red Dust Cleaner undiluted.
A more concentrate dilution may be required where concrete has been cured for an extended period of time.
Do not leave Iron Ore Red Dust Cleaner on any surface for extended periods of time.
To maintain product integrity, keep container sealed when not in use.

Dose

Use 10 to 20% of Iron Ore Red Dust Cleaner with fresh water and left to react for 5 - 40 minutes then the residues should be rinsed off thoroughly with clean water jet. Click for More details http://rxmarine.com/Iron-Ore-cleaning-direction

This is very effective chemical for Iron ore and rust removal action. Which dissolves Iron Ore rust from all kinds of surface.

If hardness contaminations remain repeat the process. Also cleaning property can be increase at temperature of 75 to 80 ‘C

Technical specifications

Iron Ore Red Dust Cleaner Usage Directions

Directions for Use

In general Dilute 1 part Iron Ore Red Dust Cleaner with 4 parts water and spray onto the surface being cleaned, And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate.

And For Hard Deposits Vigorously agitate the on the surface being cleaned with a stiff bristled brush or broom. And allow Iron Ore Red Dust for 20 to 40 Minutes to penetrate. Again, vigorously agitate the surface. The iron ore will begin to break up and be released from the substrate.

Stubborn areas may need to be again saturated and left for a further 10 minutes before vigorously agitating.

Rinse the surface with a high pressure washer or hose until all dissolved concrete and Iron Ore Red Dust Cleaner has been removed from the surface being cleaned.

Note

Being Safe is being noticed. Iron Ore Red Dust Cleaner easily dissolves iron ore and stain
RXSOL is pioneer to manufacture Rust Remover. RXSOL brand Iron Ore Red Dust Cleaner is highly concentrated and full strength of material to remove Iron Ore and rust from metal surface. Our compnay name is popular as a Iron Ore Red Dust Cleaner supplier in Mumbai, Chennai, Kolkata, Gandhidham, Mundra, Kandla, Sikka, Surat, Goa, Manglore, Vizag - Visakhapatnam, Chennai, Ennore, Haldia, Paradip, Fujairah, Dubai, Sharjah, Abu Dhabi, Middle East, Gulf, Turkey, Istanbul, USA.

Pl. refer this link for our various location details...

For Tamilnadu - http://ennoreindiachemicals.com/contact-us
For Andhra Pradesh - http://vizagchemical.com/contact-us
East Coastal - http://eastindiachemicals.com/contact-us
For Gujrat Port - http://westindiachemical.com/contact-us
For Mumbai Port - http://marinechemical.in/contact-us
For JNPT - GOA - Manglore port - http://rxchemicals.com/contact-us
For Middle East - Gulf - http://www.dubichem.com/con

Remarks / Precaution

Safety and Environment Safety Iron Ore Red Dust Cleaner is classified as a skin irritant in its concentrate form and is classified as nonhazardous for transport according to the Australian Dangerous Goods Code. This “non-DG” classification also means less regulated storage of Iron Ore Red Dust Cleaner containers on construction sites and industrial warehouses. Whilst Iron Ore Red Dust Cleaner displays a very low hazard profile for the user in terms of its effect on skin, eyes and respiratory system it is recommended to always wear protective gear including but not limited to chemical proof coveralls, goggles, gloves and rubber boots to minimize exposure to concrete residues and prolonged contact with Iron Ore Red Dust Cleaner

Biodegradation and Aquatic Safety Iron Ore Red Dust Cleaner is readily biodegradable, phosphate free and does not contribute to the eutrophication of waterways.

Waste Water Systems Red Dirt Buster has very low COD and BOD levels making it an excellent choice for use where wastewater processing systems are used. It is, however, recommended that pH readings be taken to ensure that wastewater pH readings comply with board recommendations

Packing sizes

Iron Ore Red Dust Cleaner is available in various sizes and packing. We are keeping ready stock of rust remover in 30, 50, 220 LTR packing.

MSDS

Product Name	Iron Ore Red Dust Cleaner
Product Type	RXSOL-22-1388-025

Company Details:

RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA

Branch Stock Point : Mumbai, Kandla, Kolkata, Chennai, Visakhapatnam, Fujairah, Muscat

Phone	+91 22 27815540 / 41 / 42
Fax	+91 22 2781 1318 :::AOH :0091 9821214367
Email	mail@rxmarine.com

INGREDIENTS

All hazardous substances as defined by the NOHSC code 1008 are listed by chemical name and CAS No. Other ingredients which are determined to be non-hazardous are listed by generic name or as “other ingredients determined not to be hazardous.”

CHEMICAL NAME CAS No. PROPORTION

Proprietary Acidic Organic Salt Complex Secret 30-60%

Other ingredients determined not to be hazardous >60%

HAZARDOUS SUBSTANCE ACCORDING TO THE CRITERIA OF NOHSC

NON DANGEROUS GOODS ACCORDING TO THE Australian Dangerous Goods Code

Product Name: iRON ORE Red DUST CLEANER

Risk Phrase:

R36 Irritating to eyes

R37 Irritating to respiratory system

R38 Irritating to skin

Safety Phrases: S(1) Keep out of reach of children S24/25 Avoid contact with skin and eyes.

Swallowed:	If poisoning occurs, immediately contact a doctor or a Poisons Information Centre Tel 131 126 . Do NOT induce vomiting. Give 3 glasses of water
Eyes:	In case of contact with eyes, flush immediately under running water (ensure eyelids are held open) for 15 minutes. If irritation persists contact a doctor or Poisons Information Centre.
Skin:	Remove contaminated clothing immediately and wash skin thoroughly with soap and water. Seek medical advice if irritation persists
Inhaled:	Remove from contaminated area. Apply artificial respiration if not breathing.
First Aid Facilities:	Normal washroom facilities.
Advice to doctor:	Treat symptomatically. Immediate dilution with water beneficial.

Flammability: Not flammable or combustible.

Fire/Explosion Hazard: Use dry chemical, foam or water fog. Wear full body protective clothing with self contained breathing apparatus (SCBA) and

protective gloves. Use any means available to prevent any spillage entering a watercourse.

Hazardous Combustion Products: None known

Spills and Disposals:

Large Spills - Absorb on sand, dirt, vermiculite or similar absorbent material. Place into labelled drums and dispose of according to local government regulations. Immediately notify emergency services (Police or Fire Brigade) if the spill is too large for you to safely and effectively handle.

Small Spills – Flush away with copious amounts of water.

Personal Protective Equipment: Refer to Section 8 of this MSDS for PPE required.

Storage & Transport:	Store in a cool place and out of direct sunlight. Store away from strong alkalis and oxidizing agents. Store away from possible contact with non-ferrous metals. Keep container sealed when not in use. Store locked up and out of reach of children. Only store in the original container as supplied by the manufacturer.
Handling:	Always use recommended Personal Protective Equipment (see section 8 of this MSDS). Do not mix with any other chemical unless expressly recommended by the manufacturer.

Exposure Standards: No exposure standards have been assigned to this product.

Engineering Controls: Maintain adequate ventilation at all times. In most circumstances natural ventilation systems are adequate unless the material is heated,

reacted or otherwise changed in some type of chemical reaction, then the use of a local exhaust ventilation system is recommended.

Personal Protection Equipment:

Gloves – Use NBR or vinyl gloves.

Goggles – Use chemical goggles.

Respiratory Protection – Not normally required. If used in confined spaces, select and use respirators in accordance with AS/NZS 1715/1716.

The use of half-face P1 (dust/mist) respirator with replaceable filters is recommended.

Appearance: Charastic colour liquid with mild chemical odour

Boiling Point: Not available

Vapour Pressure: Not available

Specific Gravity: 1.12

Flashpoint: Not flammable

Flammability Limits: Not flammable

Solubility in Water: Completely soluble

OTHER PROPERTIES Corrosiveness: Mildly corrosive to carbon steel, galvanized metal and aluminium.

Reactivity: Will react with alkalis and powdered oxidizing agents.

pH: 1.0 (Concentrate)

Stability: Stable under normal conditions of use.

Hazardous Decomposition Products: Non known.

Hazardous Polymerization: Will not occur.

Incompatibilities: Strong alkalis and oxidizing agents.

Conditions to avoid: Incompatibilities and excessive heat.

HEALTH EFFECTS:-

ACUTE

Swallowed: Will cause irritation to the mouth, throat and stomach with effects including mucous build-up, irritation to the tongue and lips and pains in the stomach, which may lead to nausea, vomiting and diarrhoea.

Eye: Will cause severe irritation and possible burns to the eyes with effects including: tearing, pain, corneal opacity and blurred vision. Skin: Will cause irritation to the skin, with effects including; redness, itching and drying/defatting.

Inhaled: Mists from the product may cause irritation to the nose, throat and respiratory system with effects including; coughing, discomfort, breathing difficulty and shortness of breath.

CHRONIC Prolonged or repeated skin contact may lead to dermatitis. Prolonged eye contact may cause permanent eye damage.

Toxicological Information: There is no toxicological information for the product Discrete

Ecological Information: There is no ecological information for the product IRON Ore Red Dust Cleaner

Disposal Methods: Recycle all plastic containers using suitable local council recycling facilities. Rinse out the container with clear water. Avoid tipping product directly into the sewer system.

IRON Ore Red Dust Cleaner is not classified as a Dangerous Good for transport or storage.

UN Number: Not allocated

Dangerous Goods Class and Subsidiary Risk: Not allocated

Proper Shipping Name:Not allocated

Hazchem Code:Not allocated

Poisons Schedule No: Not allocated

Poisons Scheduling: S5

S1 Avoid contact with eyes

Abbreviations:

ppm - Parts per million

TLV - Threshold Limit Value

mmHG - Millimetres of Mercury (Hg) – this is a unit of pressure

CAS No - Chemical Abstracts Service Registry Number

TWA - Time Weighted Average

STEL -Short Term Exposure Limit

PEL - Permissible Exposure Limit.

& >- Less Than > Greater Than

UN - United Nations

AICS - Australian Inventory of Chemical Substances

LC50 - Lethal Concentration LC50 is the concentration of a material in air which causes death of 50% (one half of a group of test animals

LD50 - Lethal Dose”. LD50 is the amount of a material, given all at once, which causes the death of 50% (one half) of a group of test animals.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties.

Iron Ore Red Dust Cleaner

Iron Ore Red Dust Cleaner

Need a quote for this product?