Polyacrylamide series products are water-soluble linearity high polymers. It is almost insoluble in benzene, ether, lipin and acetone and other common organic solvent and soluble easily in water. With flocculability, thickening, shear performance, resistance-diminishing performance and dispersivity, it is widely used in oil extraction, mineral separation, coal washing, metallurgy, chemical industry, papermaking, spinning, sugar manufacturing, medicine, environmental protection, building materials and agriculture industries.
Main application:
(1) For industrial wastewater treatment, especially for suspended particles, coarse, high concentration, particles with a positive charge, water, PH value is neutral or alkaline waste water, such as iron and steel plants, electroplating plants and waste water, waste metallurgical, coal washing waste water such as sewage treatment works well.
(2) As a flocculating agent, mainly used in industrial solid-liquid separation process, including settlement, to clarify, concentrate and sludge dewatering processes. Applications for all the major sectors are: Urban Sewage Treatment, Paper, Food Processing, Petrochemical, Metallurgical Processing, Dyeing and the Sugar and all kinds of industrial wastewater treatment.
(3) In the paper industry can be used as dry strength agents, retention agent, filter aid. They can be greatly improved as paper quality, enhance the physical strength of paper and reduce the loss of fiber, can also be used in the treatment of white water at the same time, in the deinking process can play a significant flocculation.
(4)In the mining, coal mining industry can be used for waste water, coal washing waste water clarifier.
(5)They Can be used for dyeing wastewater, leather wastewater, oily wastewater treatment, so that turbidity removal, decolorization, to achieve the emission standards.
(6).For oilfield water plugging agent profile, three used oil displacement agent.My Skype: frank99886600
(7).Used as paper additives, PAM and widely used in the paper can be used as dispersant long fiber paper, wet and dry enhancer, retention, filter aid and the flocculent papermaking wastewater.
Cautions
1. Dissolution operation shall be done in plastic, porcelain and stainless steel agitator tanks and far away from irons
2. It is required to place in cool dry rooms(below 35 celsius degree),and prevent high temperature and sunshine in transportation and storage.
How to choose Polyacrylamide?
1. Anionic PAM is suitable for higher density, inorganic suspension substance with positive charge and PH value is neutral of basic solution with thick suspension particles 1mm-10mm.
2. Cationic PAM is suitable for suspension solution with negative charge and containing organic substance.
3. Nonionic PAM is suitable for separating mixed organic and inorganic suspension; the solution is neutral or acid.
1. Oilfield Chemicals, Oilfield chemical is a general germ,The oilfield chemicals we can supply include anionic polyacrylamide used for oil drilling mud additives , drag reduction agent and EOR(enhanced oil recovery)agent .
2. Water Treatment Chemicals,Anionic PAM: It is widely used in waste water treatment of chemical industry, municipal sewage treatment, such as coal washing, mineral processing, metallurgy, iron and steel industry and electronic industry. It is also used in oil industry to enhance oil recovery which is widely used. In addition, it can be used as paper additives and textile pulp agent. Cationic PAM: It is very efficient in usage and has high dehydration rate. It is used for the waste water treatment in alcohol factory, monosodium glutamate factory, sugar factory, beverage factory, tanneries, dyeing and other fields. It has a better effect to be used together with inorganic coagulant in particular. It can be used as paper additives as well.
Product name:Polyacrylamide
Mf:(C3H5NO)n
CAS NO.:9003-05-8
EINECS No.:201-173-7
Other name:Polyacrylamide absorbent Gel; Polyacrylamide solution; Acrylamide resin ,pam/cpam/apam/polyacrylamide/cationic polyacryamide/anionic polyacrylamide.;
Acrylamide resin (high M.Wt.); Acrylamide gel solution; Polyacrylamide,hydrolyzed; Polyacrylamide; PAM
Appearance:white powder or granule
Polyacrylamide is, simply called PAM, a water- soluble high polymer and widely used in petroleum, paper-making, metallurgical, textile, chemical and environment protection fields. There are three categories of anionic, cationic and non-ionic type.
Polyacrylamide according to different uses and users of the product performance requirements can choose to use different molecular weight.
| Product Name | Polyelectrolyte (Polyacrylamide Type) |
| Product Type | RXSOL-19-1636-050 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kolkata, Chennai, Gandhidham, Visakhapatnam, Fujairah, Muscat, Nairobi, Canada
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
|
Ingredient |
CAS No |
Percent |
|
Potassium salt |
Confidential |
10 - 20% |
| Proprietory Formulation of Polyacrylamide | Confidential | 15 - 20% |
Trade secret information: A specific chemical identity and/or percentage of composition has been withheld as a trade secret.
Hazard Classification
Unknown toxicity
Acute toxicity, oral 0.0 %
Acute toxicity, dermal 0.0 %
Acute toxicity, inhalation, vapor 37.4 %
Acute toxicity, inhalation, dust 38.2 %
or mist
Label Elements:
Hazard Symbol: No symbol
Signal Word: No signal word.
Hazard Statement:
Precautionary Statement
Prevention: Avoid release to the environment.
Disposal: Dispose of contents/container to an appropriate treatment and disposal facility in accordance with applicable laws and regulations, and product characteristics at time of disposal.
Other hazards which do not result in GHS classification: None identified.
|
Ingestion: |
Treat symptomatically. Get medical attention. |
|
Inhalation: |
Remove exposed person to fresh air if adverse effects are observed. |
|
Skin Contact: |
Wash with soap and water. If skin irritation occurs, get medical attention. |
|
Eye contact: |
Any material that contacts the eye should be washed out immediately with water. If easy to do, remove contact lenses. |
Most important symptoms/effects, acute and delayed
Symptoms: See section 11.
Indication of immediate medical attention and special treatment needed
Treatment: Treat symptomatically
General Fire Hazards: No unusual fire or explosion hazards noted. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media: CO2, dry chemical, foam, water spray, water fog.
Unsuitable extinguishing media: Not determined.
Specific hazards arising from the chemical: Material will not burn until water has been evaporated. Container may rupture on heating. When heated, hazardous gases may be released including: sulfur dioxide. See section 10 for additional information.
Special protective equipment and precautions for firefighters Special fire fighting procedures: No data available.
Special protective equipment for fire-fighters: Wear full protective firegear including self-containing breathing apparatus operated in the positive pressure mode with full facepiece, coat, pants, gloves and boots
.
| Personal precautions, protective equipment and emergency procedures: |
Ventilate area if spilled in confined space or other poorly ventilated areas. Personal Protective Equipment must be worn, see Personal Protection Section for PPE recommendations. |
|
Methods and material for containment and cleaning up: |
Dike far ahead of larger spill for later recovery and disposal. Pick up free liquid for recycle and/or disposal. Residual liquid can be absorbed on inert material. Wash area with soap and water. Spilled liquid and dried film are slippery. Use care to avoid falls. |
|
Environmental Precautions: |
Avoid release to the environment. Prevent further leakage or spillage if safe to do so. |
|
Precautions for safe handling: |
Do not breathe dusts or mists. Do not get in eyes, on skin, on clothing. Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Wash hands thoroughly after handling. Launder contaminated clothing before reuse. Avoid contact with eyes and prolonged or repeated contact with skin. Avoid breathing mists or vapors. When using do not eat, drink or smoke. Stir well before use. Keep containers closed when not in use. Minimize contact with air to reduce contamination with mold, fungus, or other organisms which could cause decomposition or spoilage. Wash thoroughly after handling. Observe good industrial hygiene practices. Provide adequate ventilation. Wear appropriate personal protective equipment. Avoid environmental contamination. |
| Maximum Handling Temperature: | Not determined. |
| Conditions for safe storage, including any incompatibilities: | Store away from incompatible materials. See section 10 for incompatible materials. Keep from freezing. Do not store in open, unlabeled or mislabeled containers. |
| Maximum Storage Temperature: | Not determined. |
Control Parameters:
Occupational Exposure Limits
None of the components have assigned exposure limits.
Other exposure limits
Chemical name type Exposure Limit Values Source
Propionic acid TWA 10 mg/m3
Appropriate engineering controls: Use material in well ventilated area only. Adequate ventilation should be provided so that exposure limits are not exceeded. Mechanical ventilation or local exhaust ventilation may be required.
Individual protection measures, such as personal protective equipment
General information: Use personal protective equipment as required.
Eye/face protection: If contact is likely, safety glasses with side shields are recommended.
Skin Protection
Hand Protection: Use good industrial hygiene practices to avoid skin contact. If contact with the material may occur wear chemically protective gloves. Suitable gloves can be recommended by the glove supplier.
Other: Gloves, coveralls, apron, boots as necessary to minimize contact.
Respiratory Protection: A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator. Under normal use conditions, respirator is not usually required. Use appropriate respiratory protection if exposure to dust particles, mist or vapors is likely. Use self-contained breathing apparatus for entry into confined space, for other poorly ventilated areas and for large spill clean-up sites. Consult with an industrial hygienist to determine the appropriate respiratory protection for your specific use of this material. A respiratory protection program compliant with all applicable regulations must be followed whenever workplace conditions require the use of a respirator.
Hygiene measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing to remove contaminants. Discard contaminated footwear that cannot be cleaned.
Appearance:
Physical state: liquid
Form: liquid
Color: White
Odor: Slight
Odor threshold: No data available.
pH: 2.5 - 3.5
Freezing point: -1 °C
Boiling Point: 214 °F (101 °C)
Flash Point: Not applicable.
Evaporation rate: 1 n-butyl acetate=1
Flammability (solid, gas): No data available.
Upper/lower limit on flammability or explosive limits Flammability limit - upper (%): No data available.
Flammability limit - lower (%): No data available.
Explosive limit - upper (%): No data available.
Explosive limit - lower (%): No data available.
Vapor pressure: Approximate 17 torr (20 °C 68 °F)
Vapor density: 1
Relative density: 1.15 68 °F (20 °C)
Solubility(ies) Solubility in water: Dispersible Solubility (other): No data available.
Partition coefficient (n-octanol/water): No data available.
Auto-ignition temperature: No data available.
Decomposition temperature: No data available.
Viscosity: 100 mPa.s ( 77 °F (25 °C) )
Other information VOC: 0.5 %
Percent Solid: 37 % (Percent by Weight)
Percent volatile: 63 %(Percent by Weight)
Reactivity: No data available.
Chemical Stability: Material is stable under normal conditions.
Possibility of Hazardous Reactions: Will not occur.
Conditions to Avoid: Do not freeze.
Incompatible Materials: Alkalies. Bases. Strong oxidizers
Hazardous Decomposition Products: Irritating and toxic substances may be emitted upon combustion, burning, or decomposition of dry solids. Thermal decomposition or combustion may generate smoke, carbon monoxide, carbon dioxide , sulfur oxides, mercaptans, sulfides, including hydrogen sulfide and other products of incomplete combustion. Thermal decompositon may generate phosphorus oxides and other phosphorus containing compounds. Thermal decompositon may generate potassium oxides and other potassium containing compounds. Thermal decompositon may generate sodium oxides and other sodium containing compounds.
Information on likely routes of exposure Inhalation: No data available.
Ingestion: No data available.
Skin Contact: No data available.
Eye contact: No data available.
Information on toxicological effects
Acute toxicity Oral Product: May cause irritation of the gastrointestinal tract. Not classified for acute toxicity based on available data.
Dermal Product: Not classified for acute toxicity based on available data.
Inhalation Product: Overexposure to vapors or mist may cause dizziness, headache, nausea, and/or flu-like symptoms. Persons with sensitive airways (e.g., asthmatics) may react to vapors. Not classified for acute toxicity based on available data.
Skin Corrosion/Irritation:
Product: Prolonged or repeated contact may cause irritation.
Pre-existing skin conditions may be aggravated by prolonged or repeated exposure. Prolonged or repeated exposure may cause severe irritation.
Remarks: Not classified as a primary skin irritant.
Serious Eye Damage/Eye Irritation:
Product: Remarks: Not classified as a primary eye irritant.
Respiratory sensitization: No data available
Skin sensitization: No data available
Specific Target Organ Toxicity - Single Exposure: No data available
Aspiration Hazard: No data available
Other effects:
Acrylic copolymer Persons with sensitive airways (e.g., asthmatics) may react to vapors.
Chronic Effects Carcinogenicity: No data available
IARC Monographs on the Evaluation of Carcinogenic Risks to Humans:
No carcinogenic components identified US.
National Toxicology Program (NTP) Report on Carcinogens:
No carcinogenic components identified US. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050):
No carcinogenic components identified Germ Cell Mutagenicity: No data available
Reproductive toxicity: No data available
Specific Target Organ Toxicity - Repeated Exposure: No data available
Ecotoxicity
Fish Product: LC 50 (Fathead Minnow, 4 d): 996 mg/l
Potassium salt LC 50 (Rainbow Trout, 4 d): 368 mg/l
Aquatic Invertebrates
Product: EC 50 (Water flea (Daphnia magna), 2 d): 659 mg/l
Potassium salt EC 50 (Water flea (Daphnia magna), 2 d): 527 mg/l
Toxicity to Aquatic Plants Product: EC 50 (Alga, 3 d): 307 mg/l
Potassium salt EC 50 (Green algae (Selenastrum capricornutum), 14 d): 39 mg/l
EC 50 (Green algae (Selenastrum capricornutum), 4 d): 9.16 mg/l
Toxicity to soil dwelling organisms No data available
Sediment Toxicity No data available
Toxicity to Terrestrial Plants No data available
Toxicity to Above-Ground Organisms No data available
Toxicity to microorganisms No data available
Persistence and Degradability
Biodegradation
Potassium salt OECD TG 302 B, 33 %, 28 d
OECD TG 301 D, 5 %, 30 d
Bioaccumulative Potential Bioconcentration Factor (BCF) No data available
Partition Coefficient n-octanol / water (log Kow) No data available
Mobility: No data available
Other Adverse Effects: No data available.
|
|
Treatment, storage, transportation, and disposal must be in accordance with applicable Federal, State/Provincial, and Local regulations. Dispose of packaging or containers in accordance with local, regional, national and international regulations. Empty container contains product residue which may exhibit hazards of product. |
|
Contaminated Packaging: |
Container packaging may exhibit hazards. |
DOT Not regulated.
IMDG Not regulated.
IATA Not regulated.
Transport in bulk according to Annex II of MARPOL73/78 and the IBC Code
None known.
Shipping descriptions may vary based on mode of transport, quantities ,temperature of the material, package size, and/or origin and destination It is the responsibility of the transporting organization to follow all applicable laws, regulations and rules relating to the transportation of the material. Review classification requirements before shipping materials at elevated temperatures.
US Federal Regulations
TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D)
US State Regulations
US. California Proposition 65
No ingredient regulated by CA Prop 65 present.
Inventory Status Australia (AICS) This product requires notification before sale in Australia.
Canada (DSL/NDSL) All components are in compliance with the Canadian Environmental Protection Act and are present on the Domestic Substances List.
China (IECSC) This product may require notification in China. European Union (REACh) To obtain information on the REACH compliance status of this product, please visit Lubrizol.com/REACH, or e-mail us at REACH_MSDS_INQUIRIES@Lubrizol.com
Japan (ENCS) May require notification in Japan.
Korea (ECL) This product requires notification before sale in Korea.
New Zealand (NZIoC) All components are in compliance with chemical notification requirements in New Zealand.
Philippines (PICCS) All components are in compliance with the Philippines Toxic Substances and Hazardous and Nuclear Wastes Control Act of 1990 (R.A. 6969).
Switzerland (SWISS) All components are in compliance with the Environmentally Hazardous Substances Ordinance in Switzerland.
Taiwan (TCSCA) This product requires notification before sale in Taiwan.
United States (TSCA) All components of this material are on the US TSCA Inventory. The information that was used to confirm the compliance status of this product may deviate from the chemical information shown in Section 3
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents.The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product .in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications - usage in such may cause risks not mentioned in this sheet. Do not use for other.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.