RXSOL Defoam X additive is a low-toxicity blend of defoaming agents formulated to control foaming in muds containing freshwater or seawater and in viscous brine systems.
Rxsol Defoam X additive is a wide-application product that reduces the foaming tendencies of water-base muds. It is compatible with freshwater muds, seawater muds, brine systems and all common mud additives. This additive has proven to be especially effective in KCl and seawater muds. It is easy to mix, works quickly, is effective in low concentrations and is a more persistent defoamer than alternative products. Normal treatments of Rxsol Defoam X additive range from 0.05 to 0.10 lb/bbl (0.14 to 0.29 kg/m3). Severe foaming can require treatments as high as 0.2 lb/bbl (0.57 kg/m3 ). The use of Rxsol Defoam X additive is recommended for foam prevention when making periodic treatments with organic materials such as lignosulfonate, lignite and tannin-base additives. Rxsol Defoam X additive should be added in a location which allows the product to be incorporated into the entire circulating mud system. Although this additive is viscous, it should not be diluted. Dilution significantly reduces the effectiveness of the product.
Physical Properties
Physical appearance :White, viscous liquid
Specific gravity :0.95
Flash point :>400°F (202.8°C) (PMCC)
Freezing point :-20°F (-28.9°C)
| Product Name | RXSOL Defoam X |
| Product Type | RXSOL-81-8147-210 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 / 5555 / 9999 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
| Name | CAS# | % by Weight |
| Glycol Blend |
60-100 % |
| EMERGENCY OVERVIEW | CAUTION! MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Avoid contact with eyes, skin and clothing. Avoid breathing airborne product. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling. |
| ACUTE EFFECTS: | |
|
INHALATION |
May be irritating to the respiratory tract if inhaled. |
| INGESTION | May cause gastric distress, nausea and vomiting if ingested. |
| SKIN | May be irritating to the skin. |
| EYES | May be irritating to the eyes |
|
Eye Contact |
Promptly wash eyes with lots of water while lifting the eye lids. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues. |
|
Skin Contact |
Wash skin thoroughly with soap and water. Remove contaminated clothing. Get medical attention if any discomfort continues. |
|
General |
Treat symptomatically and supportively. |
|
Inhalation |
Move the exposed person to fresh air at once. Perform artificial respiration if breathing has stopped. Get medical attention. |
| Ingestion | Drink a couple of glasses water or milk. Do NOT induce vomiting unless directed to do so by a physician. Never give anything by mouth to an unconscious person. Get medical attention. |
| FLASH POINT (°F) | >399 |
| AUTO IGNITION TEMP. (°F) | N/D |
| FLAMMABILITY LIMIT - LOWER(%) | N/D |
| FLAMMABILITY LIMIT - UPPER(%) | N/D |
| EXTINGUISHING MEDIA | Carbon dioxide (CO2). Dry chemicals. Foam. Water spray, fog or mist. |
| SPECIAL FIRE FIGHTING PROCEDURES | Wear positive-pressure, self-contained breathing apparatus (SCBA) and protective fire fighting clothing (including fire fighting helmet, coat, pants, boots, and gloves). If protective equipment is not available or not used, fight fire from a protected location or safe distance. |
| UNUSUAL FIRE & EXPLOSION HAZARDS | No unusual fire or explosion hazards noted. |
| HAZARDOUS COMBUSTION PRODUCTS | Irritating gases/vapors/fumes. Oxides of: Carbon. |
Personal preCcaution:Use proper personal protective equipment as indicated in Section 8.
SPILL CLEAN-UP PROCEDURES:
Absorb in vermiculite, dry sand or earth and place into containers. Rinse area with water. Dike far ahead of larger spills for later disposal. Do not contaminate drainage or waterways
|
Handling precautions |
Ventilate well, avoid breathing vapors. Use approved respirator if air contamination is above accepted level. Wear full protective clothing for prolonged exposure and/or high concentrations. Eye wash and emergency shower must be available at the work place. Wash hands often and change clothing when needed. |
| Storage precautions: | Store at moderate temperatures in dry, well ventilated area. Keep in original container. |
|
Engineering Controls |
Use appropriate engineering controls such as, exhaust ventilation and process enclosure, to reduce air contamination andkeep worker exposure below the applicable limits. |
|
Ventilation |
Supply natural or mechanical ventilation adequate to exhaust airborne product and keep exposures below the applicable limits. |
| Eye protection |
Wear chemical safety goggles where eye exposure is reasonably probable. |
| Protecative clothing: | Wear appropriate clothing to prevent repeated or prolonged skin contact |
| Hygienic work practices | Wash promptly with soap and water if skin becomes contaminated. Change work clothing daily if there is any possibility of contamination. |
| Appearance/Physlcal state | Liquid |
| Color | white |
| Odor | Mild (or faint). |
| Solubility Description | Insoluble in water |
| Density/specific gravity (g/ml) | 0.9 - 1.0 |
| Vapor density (air = 1) | N/D |
| Vapor pressur | 1.0 mmHg |
| evaporation rate | N/D |
| Ph - Value,diluted solution | 5-8 |
|
Stability |
Stable |
|
Conditions to Avoid |
Avoid heat |
|
Hazardous polymerization |
Will not polymerize. |
|
Polymerization Description |
Not relevant. |
| materials to avoid | Strong oxidizing agents. |
| EMERGENCY OVERVIEW | CAUTION! MAY CAUSE EYE, SKIN AND RESPIRATORY TRACT IRRITATION. Avoid contact with eyes, skin and clothing. Avoid breathing airborne product. Keep container closed. Use with adequate ventilation. Wash thoroughly after handling. |
| ACUTE EFFECTS: | |
|
INHALATION |
May be irritating to the respiratory tract if inhaled. |
| INGESTION | May cause gastric distress, nausea and vomiting if ingested. |
| SKIN | May be irritating to the skin. |
| EYES | May be irritating to the eyes |
NA
Wast management:
This product does not meet the criteria of a hazardous waste if discarded in its purchased form. Under RCRA, it is the responsibility of the user of the product to determine at the time of disposal, whether the product meets RCRA criteria for hazardous waste. This is because product uses, transformations, mixtures, processes, etc, may render the resultingmaterials hazardous. Empty containers retain residues. All labeled precautions must be observed
NA
NA
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com has been advised of the possibility of such damages.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.