Best suitable prouct for WASHING MACHINE. Also very active lime scale remover to remove alkaline salts and water scales from automatic dishwashing machine. And It can be used in appliances such as Washing Machines, Dish Washers, Geysers, Steam Iron, Coffee Makers, Bath Tubs, Bathroom Fixtures etc.
It is effectively removes the unwanted scales from your washing machine in order to give it more life. Scalegun RX also helps you to keep your clothes clean and results in reduction of electric bills.
SCALE GUN RX – Powerful Washing Machine & Appliance Descaling Chemical
SCALE GUN RX is a specialized descaling chemical and lime-scale remover designed to remove unwanted mineral deposits, alkaline salts, and hard-water scale from washing machines and a wide range of household and commercial appliances. It is particularly suitable for equipment affected by calcium and other water-scale deposits.
Regular descaling helps maintain equipment efficiency, improve cleaning performance, and reduce the problems associated with accumulated hard-water deposits.
What is SCALE GUN RX?
SCALE GUN RX is a concentrated descaling formulation developed primarily for washing machine descaling. It can also be used for selected appliances and surfaces where lime scale and water-scale deposits accumulate.
The product is listed for applications including washing machines, automatic dishwashers, geysers, steam irons, coffee makers, bathtubs, and bathroom fixtures.
Why Does Scale Build Up?
Hard water contains dissolved minerals, particularly calcium and magnesium salts. During heating, evaporation, and repeated water circulation, these minerals can precipitate and form a hard deposit commonly known as limescale or water scale.
Scale accumulation can:
-
Reduce heating efficiency
-
Restrict water flow
-
Affect appliance performance
-
Increase cleaning requirements
-
Reduce equipment efficiency
-
Contribute to premature equipment maintenance
For heating appliances, scale can act as an insulating layer, making the equipment work harder to transfer heat.
The correct quantities of requirement for descaling will depend upon the character and thickness of scale deposits. For regular descaling prepare a 2 to 4% solution with cold water, and fill the tank just below the overflow level, or One packet of 100 gram add to the water for a dummy cycle run, this helps remove any scales that might have formed. Apply higher strength to highly contaminated scale . Drain the tank and fill with cold water and run the machine for 5 minutes and flush with water until the outlet water shows neutral pH. Good results are obtained when descaling is done at 60 Deg. C.
For PDF pl. click here http://rxmarine.com/scale-gun
Benefits: Removes any scaling that has happened in side a Washing Machine, Improves washing machine performance, saves electricity, Eco Friendly.
Applications of SCALE GUN RX
1. Washing Machine Descaler
SCALE GUN RX is primarily intended for washing machine descaling. It helps remove accumulated mineral deposits from internal surfaces and components affected by hard-water scale.
Regular descaling can help maintain washing-machine performance and reduce the impact of mineral buildup.
2. Automatic Dishwashers
The product is also suitable for removing alkaline salts and water-scale deposits from automatic dishwashing machines, subject to equipment and manufacturer compatibility.
3. Geysers and Water Heaters
Heating equipment can be particularly susceptible to mineral scale because continuous heating accelerates precipitation of hardness salts. SCALE GUN RX can be used for suitable descaling applications according to the equipment manufacturer's recommendations.
4. Steam Irons
Mineral deposits can accumulate in water-containing parts of steam irons. A suitable descaling treatment can help remove these deposits and maintain proper operation.
5. Coffee Makers
Coffee-making equipment that uses hard water may develop mineral deposits over time. SCALE GUN RX is listed for coffee-maker descaling applications.
6. Bathroom Fixtures
SCALE GUN RX can also be used for selected bathroom fixtures affected by hard-water deposits, including bathtubs and other compatible surfaces.
SCALE GUN RX for Hard-Water Problems
Hard-water scale is a common maintenance problem in appliances that heat or circulate water. A regular descaling program can help prevent excessive accumulation before deposits become difficult to remove.
For commercial laundries, hotels, hospitals, restaurants, and other facilities operating multiple washing machines or water-heating appliances, scheduled descaling can be an important part of preventive maintenance.
Packaging
SCALE GUN RX is listed in several packaging options, including 5 L, 10 L, 20 L, 25 L, and larger packaging, while smaller product formats such as 500 g and 1 kg jars are also listed for certain markets/applications. Packaging availability may vary by supplier.
SCALE GUN RX Manufacturer & Supplier
SCALE GUN RX is marketed as an RXSOL product under product code RXSOL-11-1097-025 and is categorized as a washing-machine descaler/quick-shine descaling product.
It is commercially promoted for supply in India, UAE, Oman, and other markets, with suppliers listing availability for industrial and commercial customers.
Safety and Handling
Descaling chemicals should be handled carefully and only according to the applicable Safety Data Sheet (SDS) and product instructions. Before application, always confirm compatibility with the appliance, seals, plastics, coatings, and metals.
Do not mix SCALE GUN RX with other cleaning chemicals unless compatibility has been specifically confirmed. After descaling, thoroughly rinse the equipment before returning it to normal operation.
Conclusion
SCALE GUN RX is a specialized washing machine descaler and lime-scale remover designed to tackle hard-water deposits and mineral scale. It can also be used in selected applications involving dishwashers, geysers, steam irons, coffee makers, bathtubs, and bathroom fixtures.
Regular and correctly performed descaling can help remove mineral deposits, maintain equipment performance, improve heating efficiency, and reduce maintenance caused by hard-water scale.
Available in 500 Gram / 1 Kg JAR also.
Key Benefits of SCALE GUN RX
Effective Scale Removal: Helps dissolve unwanted lime scale and mineral deposits.
Washing Machine Protection: Regular descaling can help maintain washing-machine performance.
Hard-Water Scale Control: Useful for appliances exposed to mineral-rich water.
Versatile Application: Suitable for selected washing machines, dishwashers, geysers, steam irons, coffee makers, bathtubs, and bathroom fixtures.
Helps Maintain Efficiency: Removing accumulated deposits can help equipment operate more efficiently.
How to Use SCALE GUN RX
The required concentration depends on the type and thickness of the scale deposits. Product information recommends preparing approximately a 2–4% solution for regular descaling applications, with stronger concentrations used for heavier contamination where appropriate.
For washing-machine applications, the product information describes using the prepared solution or a measured product quantity during a dummy cycle, followed by draining, rinsing, and flushing the equipment until the outlet water reaches a neutral pH.
The product information also indicates that good descaling results can be obtained at approximately 60°C where the equipment and procedure permit this.
Always follow the latest product technical instructions and the appliance manufacturer's cleaning recommendations before use.
| Product Name |
SCALE GUN RX |
| Product Type | RXSOL-11-1097-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point : Mumbai, Kandla, Kolkata, Chennai, Vizag, Fujairah, Muscat
| Phone | +91 22 65113333/ 5555 / 9999 / 27611360 / 27815540 |
| mail@rxmarine.com |
HAZARDOUS COMPONENTS CAS# OSHA / PEL ACGIH / TLV OTHER / STEL SK
NONYLPHENOL ETHOXYLATE
HYDROXYACETIC ACID 79-14-1
PHOSPHORIC ACID 7664-38-2 1mg/m3 1mg/m3
NOTE: AN UNDER SK(SKIN) INDICATES THAT OSHA REQUIRES SKIN PROTECTION TO PREVENT OR REDUCE EXPOSURE TO THIS INGREDIENT
Health Hazards (Acute and Chronic): NONE KNOWN
Routes of Entry, Signs of Exposure, and Symptoms of Exposure:
SKIN and EYES: Severe irritant to eyes.
INHALATION: Irritation and difficulty in breathing
INGESTION: Gastric pain and vomiting.
Medical Conditions Generally Aggravated by Exposure: Unknown
Carcinogenic: NONE
Emergency and First Aid Procedures:
SKIN & EYE CONTACT: Rinse skin with clear water. For eye contact immediately flush with clear running water for 15 minutes.
Get medical attention.
INHALATION: Remove to fresh air. If breathing does not return to normal, get medical attention.
INGESTION: Immediately drink large quantities of water. Get medical attention. MAY BE TOXIC OR FATAL IF SWALLOWED
INHALATION : Move the exposed person to fresh air at once. If breathing has stopped, perform mouth-to-mouth resuscitation. Keep the affected person warm and at rest. Get medical attention as soon as possible.
SKIN : Immediately flush the contaminated skin with soap and water. If this chemical penetrates the clothing, immediately remove the clothing and flush the skin with water. If irritation persists after washing, get medical attention.
EYES : Immediately wash the eyes with large amounts of water, occasionally lifting the lower and upper lids. Get medical attention immediately. Contact lenses should not be worn when working with this chemical.
INGESTION : If this chemical has been swallowed, get medical attention immediately.
Flash Point (Method Used):NONE Flammable Limits:LEL: N/A UEL: N/A
Extinguishing Media: N/A.
Special Fire Fighting Procedures: Do not enter confined fire space without proper protective equipment including a NIOSH approved self contained breathing apparatus.
Explosion Hazards: NONE
PERSONAL PRECAUTIONS : Wear appropriate protective gear for the situation. See personal protection information in section 8.
ENVIRONMENTAL PRECAUTIONS : Prevent run off into ground and surface waters or into sewers.
METHODS FOR CLEANING UP : Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Stop leak if you can do it without risk. Prevent entry into waterways, sewers, basements or confined areas. Cover with plastic sheet to prevent spreading. Absorb or cover with dry earth, sand or other non-combustible material and transfer to containers.
SPILLS: Dilute with water and flush to sanitary sewer.
Handling and Storing: Keep container closed when not in use. Do not freeze. Follow label instructions.
Other Precautions: Keep this and all chemicals out of the reach of children.
Respiratory Protection (Specify Type): For exposure above established limits (see section II) use NIOSH/MSMA approved dust/mist mask.
Ventilation: Mechanical: Recommended.
Protective Gloves: Rubber or neoprene.
Eye Protection: Chemical goggles with side shields.
Other Protective Clothing or Equipment: Drenching safety shower and eye wash station.
| Boiling Point: | ND | Appearance and odor: | Clear liquid with bland odor |
| Vapor Pressure (mm Hg): | ND | Specific Gravity (H20=1): | 1.12 |
| Vapor Density (Air=1): | ND | Melting Point: | NA |
| Solubility in Water: | COMPLETE | Evaporation Rate:(Butyl Acetate=1) | ND |
Stability: Stable
Incompatibility (Materials to Avoid): Oxidizers or strong acids.
Hazardous Decomposition or Byproducts: Heat, carbon dioxide, and carbon monoxide.
Hazardous Polymerization: Will not occur.
Toxicity Data:
Mineral Spirits 64742-48-9
Oral ( LD 50): >6 mg/kg - Rat
Inhalation ( LC 50): 8500 mg/m3/4H - Rat
Skin irritation: Moderate
Eye irritation: Moderate - Rabbit
Sensitation: Not considered an occupational sensitizer
On the basis of available information, this material is not expected to produce any significant environmental effects when recommended use instructions are followed.
Dispose of in accordance with local regulations.
Domestic: NA1993 Combustible liquids, n.o.s., (Mineral Spirits), III
International:UN1268 Petroleum distillates, n.o.s., 3, III
Ship in accordance with 49 CFR parts 100-185.
COMPONENT/ (CAS/PERCENT)/ CODES
*Mineral Spirits (64742489 100%) TSCA
REGULATORY KEY DESCRIPTIONS
All components are listed on TSCA
All information appearing herein is based upon data obtained from raw material manufacturer and/or recognized technical sources. While the information above is believed to be true and accurate, the author makes no respresentations as to its accuracy or sufficiency. Conditions of use are beyond the manufacturer's control; therefore the users are responsible to verify particular purposes.The users assume all risks of product use, handling,disposal, reliance upon, publication or use of the information contained herein. This information applies only to the product designated above and not neccessarily apply to its use in combination with other materials, products,chemical compounds, structures or processes.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.