• As ingredient in polishes, Silicone Fluid Emulsion 40 Rx is used to provide good gloss with minimum smear in both car and furniture polish formulations
• Mould release of: Rubber or plastic parts (stoppers, screw tops, bungs, etc.) Release agent for manufacturing rubberized belts.
  Release agent in printing industry.
• Lubrication of Extruded rubber parts conveyor belts. Lubricant to prevent wear & increase abrasion resistance to latex rubber.
• Textile lubricant: Yarn manufacture Sewing thread lubrication
• Hosiery manufacture
• Sewing needle lubrication, Lubricant for sewing threads & yarn to eliminate friction & tension.
• Glass fabric exhaust filters
• Rubber Goods such as Rubber Parts, Bands, Mats, Tube etc.
• Tyre Manufacturing, Tire shine & auto detailing fluid.
• Foundries
• Surgical gloves
• Chappals, Soles and heels
• Latex Manufacturing
• Plastic release
• In Cold tyre remolding process
• Release of concrete products.
• Non-flammable silicone lubricant-excellent alternative to solvent based formulations.

• Provides finish & improves water repellency for leather, vinyl & foam upholstery.

• Gives excellent dry soft handle to the fabric.

• Treated synthetic fabric have crispy handle.

Using procedure

Wipe, brush or spray the emulsion, usually diluted. Recommended starting concentration is 2 % to 5 %. (Total solids of Mould Release Agent by water). The user is recommended to determine the best conditions of dilution and application on a test sample before using in production. Breaking in the surface of new or freshly cleaned molds is best done by applying a light coat of undiluted release agent and running the empty mold through one or two heat cycles. After excess residual base fluid is wiped from the surface, the mold is ready for use.