Nonstop Cleaning Agent is a concentrated product. SLUDZA (Nonstop Cleaning Agent). This product is safer for use, storage and transportation and reduce your costs by 10 - 15%. This product dissolve and loosen deposits of SLUDGE and increase the permeability layer zones to mix with water.
This is a very strong polymer based cleaner which can be used to soften up / remove baked on drying oils. It is low toxic product with an exceptional solvency power on soil & oily matter. Suitable for cleaning of Heavy oils, Black oil, Mineral oil Products. Phthalates paraffin's vegetable oils Odour intensive products.
Main feature of this product is It finally dissociate slop emulsion to separate oil and water .This provide us with ability to dispose of waste solution. Improper use or dilution may result in a decrease in product performance. Ready-to-use neutral cleaner is designed to clean washable hard surfaces.
- Can be use with high pressure machine
- Also can be use with a flat mop.
- can be use with mop and bucket.
- Can be use with auto scrubber
- Removes grease, oil, carbon deposits, soil and grime.
- Keeps loosened deposits in suspension preventing re-deposition.
- Low toxic. , Non-flammable.
- Free from hydrocarbon solvents.
- SLUDZA has numerous cleaning applications including removal of greases, waxes, oil, sludge, soot, carbon deposits and general dirt and grime.
- Non-corrosive to ferrous metals. Suitable for all tank-coatings.
- Can be used for gas and hydrocarbon freeing of tanks.
- Can be used for deodorizing
- Contains wetting agents. Personal Protective Equipment (PPE) Recommendation:
Refer to MSDS for specific PPE guidance.
Ready-To-Use:
Necessary concentration in water only 0,2 to 0,4 % Oil and Sludge remover
SLUDZA is also recommended for local cleaning & degreasing of engine rooms, bilges & tank tops. It may be applied by brush, spray, immersion, soaking, or any other conventional means. SLUDZA is used neat. Allow a residence time of at least 20- 45 minutes where possible, to ensure good penetration & emulsification. Finally wash the system with hot water & high pressure.The emulsion residue after cleaning must be allowed to separate in a holding tank for atleast 3-5 hours before passing through an oily water separator.
1. Sweep or dust mop floors.
2. Properly position caution signs for wet floor conditions.
3. Mop floor or scrub using an auto scrubber or floor machine
4. Pick up soiled solution with a wet vacuum or tightly wrung mop.
5. No rinsing required.
6. Allow floor to dry. Note: Floors may be slippery when wet.
7. Burnish or spray-buff immediately after cleaning (optional).
Special Features
- Automatic dispensing eliminates measuring and mixing and ensures accurate dilutions.
- Will not dull or damage floor finishes.
- Clean, fresh scent.
- No rinsing is required, saving time and labor.
NOTE:
Refer to product Material Safety Data Sheet for specific physical properties, health hazard, first aid and
High penetration & emulsification , Reduces down time. For cleaning of machinery parts, bulk heads, decks, bottom plates & any oil/grease dirty areas.Used for cargo tank cleaning of mineral oils and petroleum based chemicals, Sludge etc .
Avoid eye contact with vapors, mists, or spray. Wear Safety Glasses with Side Shields when eye contact is possible. Gloves not normally required. If prolonged or repeated skin contact is expected, gloves made from the following material(s) arerecommended: Neoprene, Nitrile Rubber. Dispense SLUDZA (Nonstop Cleaning Agent) 8 with cold water using the appropriate dispensing system into a buddy jug, Easy Scrub Express Systembottles, mop bucket or directly into an auto scrubber.
| Product Name |
SLUDZA (Nonstop Cleaning Agent) |
| Product Type |
RXSOL-81-8155-025 |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
| Phone | +91 22 65113333 |
| Fax | +91 22 2781 1318 |
| mail@rxmarine.com |
| INGREDIENTS | CAS#. | WT.% |
| Surfactant | Proprietary | 15-20 |
This product is a WHITE clear liquid with a citrus odor.
| May cause eye irritation. Prolonged skin contact may cause irritation. Swallowing may cause gastrointestinal irritation. |
|
EYE CONTACT: |
Immediately flush eyes with water while lifting the upper and lower lids. Get medical attention. |
| SKIN CONTACT: | Wash with soap and water. Remove contaminated clothing and launder before reuse. Get medical attention if irritation or symptoms of exposure develop. |
| INHALATION: | Remove victim to fresh air. If breathing has stopped give artificial respiration. If breathing is difficult have qualified personnel administer oxygen. Get medical attention. |
| INGESTION: | If conscious, give 1-2 glasses of water to dilute. Do not induce vomiting. Never give anything by mouth to a person who is unconscious or convulsing. Get attention. |
| FLASH POINT | :Non-flammable |
| FLAMMABLE LIMITS | :(vol % in air) |
| LEL | :N/A |
| UEL | :N/A |
| AUTOIGNITION TEMPERATURE | :Not applicable |
EXTINGUISHING MEDIA:
Use any media appropriate for surrounding fire.
SPECIAL FIREFIGHTING PROCEDURES:
| Firefighters should wear full emergency equipment and NIOSH approved positive pressure self-contained breathing apparatus. |
UNUSUAL FIRE AND EXPLOSION HAZARDS: Thermal decomposition may yield oxides of carbon and nitrogen and hydrogen loride. Heating may produce methyl chloride
|
STEPS TO BE TAKEN IN CASE MATERIAL IS RELEASED OR SPILLED: Wear appropriate protective clothing and equipment to prevent contact. Dike spill and collect into closable containers for disposal with an inert absorbent. Prevent spill from entering sewers and waterways. Wash spill area with water. |
PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING:
| Keep container tightly closed. Store in a cool, well ventilated area. Avoid eye and rolonged skin contact. Avoid breathing vapors or mists. Do not swallow. Use with dequate ventilation. Remove and launder contaminated clothing before re-use. Wash thoroughly after handling. |
OTHER PRECAUTIONS:
| Empty containers retain product residues. Follow all MSDS precautions in handling empty containers. |
Exposure Guidelines:
| INGREDIENTS | CAS#. | EXPOSURE LIMITS |
| Surfactant | Proprietary | None Established |
RESPIRATORY PROTECTION:
| None needed under normal use conditions. If significant quantities of mist are enerated, an approved dust/mist respirator is recommended. Equipment selection depends on containment type and concentration, select in accordance with local regulations and good industrial hygiene practice. For firefighting, use self-contained breathing apparatus. |
VENTILATION:
| Good general room ventilation (equivalent to outdoors) should be adequate under normal conditions. |
GLOVES:
| Nitrile, rubber or other impervious gloves are recommended for prolonged skin contact. |
PROTECTIVE CLOTHING:
| Impervious apron, boots and other clothing are recommended if needed to prevent contact or if splashing is possible. |
EYE PROTECTION: Wear safety glasses to prevent eye contact.
OTHER PROTECTIVE EQUIPMENT: Washing facilities should be available.
| BOILING POINT (@ 760 mmHg) | :>200°F |
| FREEZING POINT | :32°F |
| SPECIFIC GRAVITY (H2O=1) | :1.00 |
| VAPOR PRESSURE | :Not available |
| VOLATILE | :Not available |
| VAPOR DENSITY (AIR=1) | :Not available |
| EVAPORATION RATE | :Same as Water |
| SOLUBILITY IN WATER | :Partial |
| pH | :7 |
| COEFFICIENT OF WATER/OIL | :Not available |
APPEARANCE AND ODOR:
This product is a White colour with a citrus odor.
STABILITY:
This material is stable.
CONDITIONS TO AVOID: Contact with copper, zinc and aluminum may release flammable hydrogen gas.
INCOMPATIBILITY: Avoid contact with strong oxidizing agents.
HAZARDOUS DECOMPOSITION PRODUCTS:
| Thermal decompositions may produce oxides of carbon and nitrogen and hydrogen chloride. When heated, methyl chloride may be produced. |
HAZARDOUS POLYMERIZATION: Will not occur.
CONDITIONS TO AVOID: Not applicable.
TOXICOLOGY DATA:
Surfactant:
No data available
Surfactant:
LC50 Fish: 70.7 mg/L/96 hr.
WASTE DISPOSAL METHOD:
Dispose in accordance with all local, state and federal regulations.
| DOT SHIPPING NAME | :Not Regulated |
| DOT HAZARD CLASSIFICATION | :N/A |
| DOT LABELS REQUIRED (49CFR172.101) | :None |
| UN NUMBER | :N/A |
| OSHA HAZARD CLASSIFICATION: | Irritant |
| EPA SARA 311 HAZARD CLASSIFICATION: | Acute health |
| EPA SARA 313: | This product contains the following chemicals regulated under SARA Title III, section 313: None |
| CERCLA Hazardous Substances (Section 103)/RQ: | This product is not subject to CERCLA reporting requirements as it is sold. Many states have more stringent release reporting requirements. Report spills required under federal, state and local regulations |
| TOXIC SUBSTANCES CONTROL ACT: | All of the components of this product are listed on the TSCA inventory. |
| CALIFORNIA PROPOSITION 65: | This product contains the following chemical which is known to the State of California to cause developmental toxicity (birth defects): None |
|
The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper application(s). The product is not sold as suitable for other applications usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer. DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. |