VOLC Coat Garbage Releaser

POLYMER BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

POLYMER  BASED non reactive coating materials which makes thin film barrier on surface after dry. Due to formation of RXSOL THIN barrier film on surface, the cleaning operation after unloading becomes quicker and easier with optimum results.

Protective Solution for hold surface which carrying corrosive and / or messy  cargos such as garbage and concentrates. It can be easily removed after discharging of garbage . Garbage Release Agent Rx is a completely biodegradable lubricant. The non-hazardous, water soluble mixable agent is designed to provide clean rapid and easy separation of Garbage materials from beds of dump trucks and haul trucks. This product is classified as Non Stick Biodegradable Agent for Garbage
FEATURES AND BENEFITS:...................................
$ Protects metal against corrosive cargo.
$Safe on all coatings, and to the personnel handling it.
$ Protects paint against cargo penetration.
$ Environmentally friendly .
$ Safe to use in occupied / covered areas.
$ Reduces turn around times .
$ Easy to Direct Spray.

Application

Heavy Duty protective Solution for Prevents buildup of garbage in truck beds.   It can be easily removed with it

This materials can be use directly with low pressure machine or manually by garden spray pump. in general practice on smooth & clean surface  each drums of 210 ltrs covers 2000 to 2500 sq meter while on rough and rusted surface require more quantities of materials.

Dose

Once applied to the truck bed, a micro-thin film spreads out across the truck bed. This film creates a negative electrostatic charge on both the surface of the truck bed and the Garbage. This causes electrostatic repulsions preventing the garbage from sticking to the surface of the truck bed.

Note

This POLYMER is safe to use , But as a precaution goggles & Protective gloves with mask require before use of this materials.
 

Future & Benefit :

  • Completely biodegradable thus minimizes environmental concerns.
  • Usually, three hauls can be made before another application is required.
  • Can be safely used with all types of asphalt mixes.
  • No liability issues
  • Does not iratate skin during contact
  • Non-carcinogenic
  • Safe on glass, wood and all metal surfaces
  • Works Great on cold-mix used by cities and counties for repair projects.
  • Effective on drag slats, rubber tire and steel rollers, pavers, patching machines and hand tools.
  • Soy based
  • Non-toxic
  • Biodegradable

 

Remarks / Precaution

Packing sizes
<p>
25 / 210 Ltrs</p>
MSDS

Product name RXSOL-22-2219-025
Product type VOLC Coat RXSOL HOLD BLOCK 25 Ltr

Company Details 
RX MARINE INTERNATIONAL
105 , A-wing, BSEL TECH PARK
VASHI , NEW BOMBAY 400705
INDIA

Phone +91 22 65113333 / 5555 / 9999 / 27611360
Fax +91 22 2781 1318 :::AOH :0091 9821214367
Email mail@rxmarine.com ,

Chemical Name

Concentration

2-ethylhexanol, ethoxylated, phosphated

5-10

Contains POLYMER

5

Odour

Odourless

Appearance

Liquid, clear

Contact with eyes

Can cause damage to the eyes

Contact with skin

Can cause damage to the skin

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract

Ingestion

The ingestion of significant quantities may cause damage to stomach lining

Environmental Hazards

None

Human Health  Hazards

Moderates

R 35:Causes skin burning effects

General

In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible) (S45)

Inhalation

Harmful,. supply or remove to fresh air and seek medical advice  attention

Skin Contact

May cause irritation Rinse with running water and soap. Skin care. Remove contaminated clothes. Remove contaminated clothing immediately and drench affected skin with plenty of water. Then wash with soap and water Seek medical advice if necessary Contaminated clothing should be laundered before reuse

Eye Contact

If substance has got into eyes, immediately wash out with plenty of water for at least 15 minutes ( Flush with running water for at least 15 minutes Immediately . )  Obtain immediate medical attentionContinue flushing with water until medical help arrives

Ingestion

Vomiting is dangerous , seek medical attention. ( Do not induce vomiting ) Never give anything by mouth to an unconscious person Give plenty of water to drink  Obtain immediate medical attention

Non combustible Decomposition products may include toxic and irritant fumes Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions

Suitable

N.A. can use  foam dry Co2 , water-spray.

Not suitable

Not applicable

Special

Not applicable

Protection of fire Fighter

Not applicable

Flashpoint

> 250º C

Special protective equipment for fire-fighters

Wear protective equipment.

Personal Precautions

Wear protective clothing as per section 8

Environmental Precautions

Do not allow to enter public sewers and watercourses

Immediate Actions

Contain spillage by any means possible

Clean Up Actions

Absorb spillage in inert material and shovel up Ventilate the area and wash spill site after material pick-up is complete

Special Precautions

Wear protective clothing as per section 8

Enviromental Precaution

Direct flow into drainage system, surface or ground water is  prohibited.

Cleaning Method

Flush Spill Area with Water andremove with liquid-absorbing material like foam sand,sawdust etc..

Handling

The usual precautions for handling chemicals should be observed See Section 8 Eyewash bottles should be available.

Storage

Keep only in the original container in a cool, well ventilated place (S3/9/49) Protect from frost.

Condition to Avoid Non flammable but avoid direct heating
Materials  to Avoid Do not subject to Acidic / Oxidizing Agents.
Handling Keep Container Tightly Closed

 NOTE : Eyewash facilities require atworkplace The product causes corrosion on skin and mucous membranes Pl. Note that In case of discharge of acidic or alkaline products into the sewerage system the pH must be in the range of 6-10 since higher or lower pH values may damage the sewerage system or impair biological dosage treatment plants. So that for maintaining pH we have to add acidic / basic medium neutaliser . For example if pH is less than 6 basic neutraliser is required and if pH is more than 10 acidic nature neutraliser is required. For details of any guideline pl. Visit our technical website www.rxmarine.com

  • Dilute in water (always use plastic jar and RXSOL should be added to  water  never add water to RXSOL.)

Exposure Limits

There are no recommended or established controls for this product

Exposure controls

No special ventilation is required unless the product is used in a spray form

Occupational exposure controls

Wear suitable protective clothing, including eye/face protection and gloves (plastic or rubber are recommended) During fumigation/spraying wear suitable respiratory equipment (S42) 

Personal protection

 

Respiratory System Protection

Approved respirator must be worn when spraying

Eye Protection 

wear eye protection (on possibility of contact )

Hand protection

wear PVC chemical resistance protective  glove    

PRODUCT PROPERTIES:

Appearance

White  liquid emulsion

Density

In g/cm3 at 20°C: 1.01

Compatibility

 

Metal

No known effect

Rubber

No known effect

pH                 
Flash point

Alkaline ( 7 to 8 ) .
Not Applicable

Solubility

100% soluble in water

Packaging

210 Size (in Litres)

-  Stable
-  Avoid overheating, Keep away from frost
-  See Section 5
-  Hazardous Decomposition Products:     
   Do not occur if stored and used as directed.  In FIRE combustion CO, CO2 , NH3, SOXetc hazardous gas produced.
NOTE :  AVOID CONTACT WITH ACID

 

Toxicological information

No experimental data available.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

Contact with skin

Prolonged skin or eye contact may cause chemical burns.

Contact with eyes

Prolonged skin or eye contact may cause chemical burns.

Ingestion

The ingestion of significant quantities may cause burning sensation.

Carcinogenicity

No evidence of carcinogenic effects.

Inhalation

Vapours or aerosols may cause irritation of eyes, nose and respiratory tract.

LD50 (oral)

> 2000 mg/kg - (Polyvinyl alcohol, partly saponified).

No components of this material are toxic to aquatic organisms, product are readily biodegradableas per by international regulation . This material must be disposed with local national regulations. Aquatic Toxicity.

Classification

This material and/or its container must be disposed of as hazardous waste EU Waste class: 06 02.

Disposal considerations

Do not discharge into drains or the environment, dispose to an authorised waste collection point. Disposal should be in accordance with local, state or national legislation.

As per guide line of local rules and regulation and before disposal and neutralization pl. refer 07 article.

Transport over land ADR/RID : Not classified as hazardous for transport

-  In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible)

Classification and labelling

Not classified as hazardous for users- S2 : Keep out of reach of children S26 : Incase of contact with eyes, rinse immediately with plenty of water and seek medical advice. S28 : After contact with skin, wash immediately with plenty of water. S37/39 : Wear suitable gloves and eye/face protection.

This information is based on our current level of knowledge and relates to the product in the state in which it is delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to guarantee any particular properties Text of R and S phrase codes used in this safety data sheet:- 

 R34

 Causes burns; 

 R37

 Irritating to respiratory system.

The information provided about the product on this Safety Data Sheet has been compiled from knowledge of the individual constituents The data given here is based on current knowledge and experience. This Safety Data Sheet describes the product in terms of safety requirements and does not signify any warranty with regard to the product's properties The data given here only applies when product used for proper applic- ation(s). The product is not sold as suitable for other applications  - usage in such may cause risks not mentioned in this sheet. Do not use for other application(s) without seeking advice from manufacturer 

DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.

  

Need a quote for this product?

Tell us the grade, packing and quantity you need — we ship across India and to major ports.

Request a quote office@kolkatachemical.com