Water Soluble Demulsifier
RXSOL water soluble demulsifier is a totally organics surfactants solution with water and soluble in crude oil for the demulsification of oil in water, capable of performance at room temperature, but with improved speed and percentage of oil removed when applied at temperatures higher about 20 degree of room temperature. RXSOL salt removal demulsifier destabilizes the oil-water interface that surrounds each water particle in the emulsion, replaces the emulsifier molecules (if any), and allows the water to coalesce. RXSOL demulsifier is a completely non-hazardous, non-toxic, biodegrable, non-corrosive, non-abrasive; non-ash-forming treatment, which will improve the quality of the fuel it, is added to.
Advantages:
- Water soluble demulsifier are easily mix with emulsion and braking process create immediately
- Non hazardous non toxic no inflammable/combustible
- No special safety procedure required for handling the material
- Cost wise very cheaper
- No flash point required
- Salt in crude oil are easily Removed
- Asphalt and paraffin contain are easily dilute
- Removed saline water is transfer to normal water
- Our water-soluble demulsifier is totally biodegrable so removing water does not contain any phenolic contain.
Dosage:
Because of the diverse nature of oil and waste amenable to treatment with RXSOL demulsifier, specific recommendations have to be made on a case-by-case basis. The dosage of RXSOL salt removal demulsifier prescribed to break a particular emulsion varies from as little as 1 gallon per 20,000 gallons (50 ppm) of oil to as much as 1 gallon per 10,000 gallons (100 ppm) of oil. A few clients have even found that 20 ppm was more effective than the higher dosages, so we suggest adding the lower levels to your laboratory bench tests to verify the correct dosage for the specific application. Finding the most cost-effective dosage, as well as determining the best conditions of temperature, slow mixing, settling time, etc., is best done in the laboratory, using a sample of the actual oil or waste and a sample of RXSOL demulsifier
Characteristics
- Physical Appearance - Homogenous Liquid
- Density - 0.9+-1.0
- Solubility - Crude oil, water, methanol, ethanol, and acetone
- Ph range - 6.0 to 8.0
- Water solubility - Soluble
Answer :
Reverse Demulsifiers—-Break oil-in-water emulsions
| Product Name | RXSOL-81-8157-210 |
| Product Type | Water Soluble Demulsifier |
Company Details:
RX MARINE INTERNATIONAL
105, A wing , BSEL , TECH PARK.
VASHI ,NEW BOMBAY 400703 INDIA
Stock Point ::: Mumbai, Kandla, Kolkata, Chennai, Gandhidham, Fujairah, Visakhapatnam, Oman, Canada
| Phone | +91 22 27815541 / 42 |
| Fax | +91 22 2781 1318 :::AOH :0091 9821214367 |
| mail@rxmarine.com |
Components
| Substance name | Contents | CAS No | EC No | Classification |
| Alkylated sulfonic acid derivates : | 25 - 50 % | 68584-22-5 | 271-528-9 |
Xn; R22 C; R34 |
| Proprietory BLEND | 50 - 80 % | Formulated Mixture | Formulation | -------- |
| 1,2,4-trimethylbenzene : | 5 - 10 % | 95-63-6 | 202-436-9 |
R10 Xn; R20 Xi; R36/37/38 N; R51-53 |
| Naphthalene : | 1-3 % | 91-20-3 | 202-049-5 |
Carc. Cat. 3; R40 Xn; R22 N; R50-53 |
Risk Phrases : Causes burns. Harmful if swallowed. Limited evidence of a carcinogenic effect. Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
Primary route of exposure : Vapours inhalation. Skin and eyes contact.
Symptoms relating to use
Inhalation : Cough. Sore throat. Shortness of breath. Corrosive to respiratory system.
Skin contact : Redness, pain. Causes burns.
Eye contact : Redness, pain. Blurred vision.
Burning sensation.
Risk of serious damage to eyes.
Ingestion : Abdominal pain, nausea. Burning sensation.
| Inhalation : | Assure fresh air breathing. Obtain medical attention if breathing difficulty persists. |
| Skin contact : |
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. Seek medical attention if irritation develops. |
| Eye contact : | Rinse immediately with plenty of water. Contact ophthalmologist immediately. |
| Ingestion : | Rinse mouth. Do not induce vomiting because of corrosive effects. Call a physician immediately. |
| Extinguishing media : | All extinguishing media can be used. |
| Specific hazards : | High temperature may liberate dangerous gases. |
| Protection against fire : |
Do not enter fire area without proper protective equipment, including respiratory protection. |
| Special procedures : | Exercise caution when fighting any chemical fire. |
| Personal precautions : | Equip cleanup crew with proper protection. Respiratory protection equipment may be necessary. |
| Environmental precautions : | Prevent entry to sewers and public waters. Notify authorities if product enters sewers or public waters. |
| Clean up methods : | Clean up any spills as soon as possible, using an absorbent material to collect it. Dilute residues and flush. |
| Precautions in handling and storage : | Good ventilation of the workplace required. |
| Storage : | Store in dry, well-ventilated area. Do not store in corrodable metal. |
| Storage - away from : | Strong bases. |
| Handling : |
Ensure prompt removal from eyes, skin and clothing. Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work. |
| Respiratory protection : |
Approved dust or mist respirator should be used if airborne particles are generated when handling this material. |
| Hand protection : | Gloves. |
| Skin protection : |
If skin contact or contamination of clothing is likely, protective clothing should be worn. |
| Eye protection : | Safety glasses. |
| Ingestion : | When using, do not eat, drink or smoke. |
| Industrial hygiene : |
Provide local exhaust or general room ventilation to minimize dust and/or vapour concentrations. |
| Physical state at 20 °C : | Liquid. |
| Colour : | Reddish brown. |
| Odour : | Pungent. |
| Pour point [°C] : | -10 |
| Boiling point [°C] : | 205 |
| Density [kg/m3] : | 0,96 (20 C) |
| Viscosity at 20°C [mPa.s] : | 500 |
| Solubility in water : | In water, the material disperses. |
| Flash point [°C] : | 87 |
| Explosion limits - lower [%] : | 1,0 |
| Explosion limits - upper [%] : | 8,0 |
| Hazardous decomposition products : | According to process conditions, hazardous decomposition products may be generated. |
| Hazardous reactions : | Reacts violently with : Bases. |
| Hazardous properties : | Attacks metals |
No Information Available
No Information Available
General : Dispose in a safe manner in accordance with local/national regulations.
Labelling ADR {
- Proper shipping name : UN3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Alkylated sulfonic
acid derivates), 8, III, (E)
Shipping name : UN3265 CORROSIVE LIQUID, ACIDIC, ORGANIC, N.O.S. (Alkylated sulfonic
acid derivates), 8, III, (E)
UN No. : 3265
H.I. nr : 80
- Tremcard nr. : 80GC3
ADR/RID : Class : 8
| Symbol : |
C : Corrosive N : Dangerous for the environment |
| R Phrase : |
R22 : Harmful if swallowed. R34 : Causes burns. R40 : Limited evidence of a carcinogenic effect. R51/53 : Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. |
| S Phrase : |
S26 : In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/37/39 : Wear suitable protective clothing, gloves and eye/face protection. S45 : In case of accident or if you feel unwell, seek medical advice immediately ( show the label when possible). S61 : Avoid release to the environment. Refer to special instructions/Safety data sheets. |
The contentsof this MSDS are in base of our knowledge. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product.
DISCLAIMER OF LIABILITY :The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable.